ASUS H110M-A M2 Front panel connections

[robguay]

Need help with Front panel connection on the H110M-A M2 motherboard. I heard if you do it incorrectly you can fry the motherboard. The link is an image of how I think they should be plugged in.

1) Does this look correct?
2) Do the letters (on the plugs) face the processor or away from the processor? I assume away because the positive pin looks to be the one on the far left.
3) Do I skip a pin between the HDD and Reset? Because there are only four slots/female inputs total on the two plugs. So a pin has to be skipped some place.

Thanks a million for any help

 

[alexoiu]

You don't skip the pin. The polarity for reset does not matter.
The manual here says it all: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-K/E11133_MB_Pin_Definition_v2_web_only.pdf?_ga=2.191745257.2128277686.1501880714-1315763638.1494183834

 

[DRagor]

It is as you put it on the picture, with one change - the pin to skip is the rightmost one.

 

[robguay]

You don't skip the pin. The polarity for reset does not matter.
The manual here says it all: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-K/E11133_MB_Pin_Definition_v2_web_only.pdf?_ga=2.191745257.2128277686.1501880714-1315763638.1494183834

Thanks I could not find that manual.

 

[robguay]

It is as you put it on the picture, with one change - the pin to skip is the rightmost one.

Thank you for your reply, been a while since I built a machine so I wanted to make sure I did not mess up.

 

[alexoiu]

You don't skip the pin. The polarity for reset does not matter.
The manual here says it all: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-K/E11133_MB_Pin_Definition_v2_web_only.pdf?_ga=2.191745257.2128277686.1501880714-1315763638.1494183834

Thanks I could not find that manual.

You're welcome.