- Jun 1, 2015
- 11
- 0
- 10,510
- 0
I recently received a corsair vengeance 8gb ram chip ddr3 when I install it the motherboard bios reads it as a 4gb at 1333 the ram chip runs at 1866.
Now the board can take the ram according to the spec sheet. But when I install it then it's a no go.
Current system is: i5 3470 cpu, 500w psu, zotac 1050ti graphics card.
Ps: the 8gb works tested it in a different rig.
Now the board can take the ram according to the spec sheet. But when I install it then it's a no go.
Current system is: i5 3470 cpu, 500w psu, zotac 1050ti graphics card.
Ps: the 8gb works tested it in a different rig.
Facebook
Twitter