Asus M5A97 Boot Device led is on

[waor]

Hi, I've just build a new pc with the next components:
- AMD Fx-8320 processor
- PSU FSP raider 650w 80+
- Mobo Asus M5A97 evo 2.0
- GPU Sapphire r9 280x dual-x
- 2x4gb Kingston Hyperx Beast 1866
-Cooler master hyper 212 evo
-SSD 120gb samsung 840 evo
-HDD 500gb seagate

My problem is that the Boot device led of the mobo is turned on (only that led), and when I turn on the computer the display says there is No Signal (it's connected with HDMI to the GPU) and I haven't even reached the BIOS. I've tried clearing the CMOS, having just the A1 slot RAM and clearing CMOS again but it still doesn't work...
I hope you guys could help me with this problem because it's the first time I build my own PC and I don't know what else can I do.
Thank you very much.

 

[lfkfkfkffs]

Those led lights normally mean that something isn't correctly connected. So just go through everything again and push on the video card and all of the cables to make sure that they are connected

 

[i7Baby]

Try Tom's checklist - http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

If that doesn't work, then you're going to have to swap out bits.

eg that power supply that is in Tier four - Not for overclocking systems or high end gaming rigs - of http://www.tomshardware.com/answers/id-1804779/power-supply-unit-tier-list.html

 

[waor]

Thank you i7Baby, about Tom's Checklist, I have re-build it again and I have added a standoff in an empty hole that I had forgotten and now the led's still turned on but when I turn the computer on it sounds also two beeps, the second one is a bit longer, but the red boot device led is still there. Everything else is well connected to the PSU.

I'm starting thinking it maybe the PSU, but it should work without OC...
Thank you very much

 

[waor]

I have tried everything and nothing works, I think it maybe the motherboard since it was a refurbished version.

 

[lfkfkfkffs]

That would probably be why. I would just return it and then buy the gigabyte 970a ud3p

 

[i7Baby]

The beeps are a code per http://en.wikipedia.org/wiki/Power-on_self-test

Find out what bios (in mobo spec - ami or ibm) you've got and work out what the beeps mean.

 

[waor]

Finally I bought a dvi to VGA adapter, connected to the display and there it was... I was starting to think I would have to use the Mobo's warranty.
Thank you guys for your attention