Asus Maximus VII Hero Won't Boot, start button and board illuminates, no q-code

[sonoflich]

Asus Maximus VII Hero Won't Boot, start button and board illuminates, no q-code Tried everything bought everything brand new my psu is an Corsair 850 32gb venagence ram plus an i7 any help would be great want to get this working

 

[Tradesman1]

Is it in the case, may well be a short, I would pull the guts and bench it, wrote a guide that may help here:

http://www.tomshardware.co.uk/faq/id-1753671/bench-troubleshooting.html

 

[sonoflich]

I'll try this on the morning had no luck with it all day were trying for about 4-5hrs with no luck when I press the start button on mobo it's starts the cuts out the lights stay on just ain't let u start it again I've checked for pins been bent they all look fine it's my 1st time building this of and mobo I contacted asus for help and he'll they didn't even know what to do honestly am hoping you can guys can help me out everything is brand new from the mobo the ram cpu u guys get the idea I anyone has a video of this with the psu been a corsair rm850 and shows were to plug in the cables that would be amazing as u said its my 1st time building this

 

[Tradesman1]

It may be shorting on the case, might be something easy, like a stick of DRAM not fully seated, forgot the 4/8Pin mobo EPS power cable, etc, the bench guide goes through the various steps that I basically use when first building a rig (I initially build outside of the case) this way you have room to work and see things better 😉

 

[smorizio]

also use the usb flashback port ot put the newest bios on the mb with standby power if the bios is old. the last 5 number of the mb is the bios rev.

 

[sonoflich]

Update turns out it were my corsair rm 850 ordered a new one hoping that will fix it

 

[suffstudio]

Hi

Did you fix this issue? I am having the same problem, all new parts. Getting no signal from on boards graphics (don't have a graphics card, and dont intend to buy one), 00 code on mobo. Driving me crazy!

 

[suffstudio]

Hi

Did you fix the problem? Having the same problem myself!

 

[smorizio]

for the person that just posted for help. make sure the cpu is in the slot..make sure there no bent pin and the cooler if used is not an intel stock cooler you did not crush the lid of the cpu. look at the mb serial number the last 4 are the bios rev. the last bios out is MAXIMUS VII HERO BIOS 3003
Improve system stability.
if your is lower then that turn the mb off and use the usb flashback port.
https://www.youtube.com/watch?v=JVvHwq3syqI