Asus Maximus VIII Hero with error 00 after transporting the PC overseas (black screen on monitor)

[apostol_raul2005]

Hello everyone,I'll just get right into my problem.
1. I did a very stupid mistake and I have shipped my PC with all components on(also worth to mention it was transported at -2 degrees in the back of a van.
2. I have a Noctua NH-D14 CPU cooler (big one)
3. When the PC arrived it would start without the normal beep and the monitor screen is black ( I have tried both with VGA and HDMI)
4. I realised that the Noctua seemed to be bent and not staying straight so I removed it, manually bent the metal part and put it back.
5. Still black screen. The Qcode error is 00. I have tried to change the 1xDDRAM that I have on different slots,I have removed the graphics card, I did a clearing of CMOS Settings,I removed both my HDD and my SDD, after all this I still get the Qcode error 00 and also the 4 led's of cpu,hdd and so on don't turn red so I can't know what is the problem.
My suspicion is eighter the Motherboard was damaged or the CPU. What do you guys think?

PC specs:
MOtherboard : Asus Maximus VIII Hero
CPU: Intel i7 6700k
CPU Cooler: Noctua NH-D14
Power Supply: Corsair RM650 80 PLUSGOld, 650W
DDram 1x HyperX Savage Black 8GB, DDR4, 2133MHz, CL13, 1.2V
GPU: GeForce® GTX 980 Ti G1 GAMING, 6GB GDDR5, 384-bit

 

[cin19]

I realised that the Noctua seemed to be bent and not staying straight so I removed it, manually bent the metal part and put it back.

That caused the problem, the MB is dead, you will need the new MB, we always recommend to remove the large cpu cooler and gpu during shipping a pc.

 

[cl-justin]

Your motherboard is most likely damaged upon shipping. Are there bent pins?

 

[Zerk2012]

00 = dead board.

 

[apostol_raul2005]

THank you very much for you answers, I have a follow up problem now , if you can help me : http://www.tomshardware.co.uk/answers/id-3872931/freeze-lock-random-color-black-white-pink.html