I am wondering if someone can help...
I have a P5Q with 2x 500GB Western Digital Drives in a RAID 0 - PLUS a 1TB Western Digital Drive for more storage.
I had a problem on one of the 500GB drives, had to replace, reformat, and reinstall Windows (Note: I changed from Windows VISTA 64bit on the previous install to Windows 7 64bit now)
Upon the first startup I had the OS running on the RAID 0 array, but I could no longer see the simple 1TB drive.
For some reason it was showing up in the BIOS BOOT section as a RAID disk, but in the RAID setup after the BIOS it shows as a NON-RAID array.
I thought I did something wrong in the BIOS settings and I couldnt figure out why it wasnt showing up... sooooo...
I changed the Hard Disk setting from RAID to IDE and tried to boot the system...
That didnt work and now when I change the setting back to RAID the 0 array will not boot the fresh OS install that I have on there...
I dont see an option to rebuild the array in the RAID setting area... I am hoping that I am missing something simple in order to make this boot again.
Can someone help?
Thanks
Chad
I have a P5Q with 2x 500GB Western Digital Drives in a RAID 0 - PLUS a 1TB Western Digital Drive for more storage.
I had a problem on one of the 500GB drives, had to replace, reformat, and reinstall Windows (Note: I changed from Windows VISTA 64bit on the previous install to Windows 7 64bit now)
Upon the first startup I had the OS running on the RAID 0 array, but I could no longer see the simple 1TB drive.
For some reason it was showing up in the BIOS BOOT section as a RAID disk, but in the RAID setup after the BIOS it shows as a NON-RAID array.
I thought I did something wrong in the BIOS settings and I couldnt figure out why it wasnt showing up... sooooo...
I changed the Hard Disk setting from RAID to IDE and tried to boot the system...
That didnt work and now when I change the setting back to RAID the 0 array will not boot the fresh OS install that I have on there...
I dont see an option to rebuild the array in the RAID setting area... I am hoping that I am missing something simple in order to make this boot again.
Can someone help?
Thanks
Chad