Hey,
So I just finished building my computer last night and when I go to boot it the red led for memok comes on. Everything else is on, but I don't have an image and it doesn't post. So I tried holding down the memok, but when it comes back on it just goes straight to a solid led. So my system is Asus P6X58D Premium MB and my memory is Mushkin Enhanced Blackline 6GB (3 x 2GB) Model 998679 1600mhz with 7-8-7-20 timings and 1.65v. I began trying to use one stick at a time to see if it might be defective ram, but the same thing keeps happening. I know the mushkin ram is not on the QVL list, but I have heard that it can work with this board. Not sure if the ram is bad or maybe incompatible? Could also be the mobo. Besides testing the ram does anyone had any similar problems or can give me some advice?
So I just finished building my computer last night and when I go to boot it the red led for memok comes on. Everything else is on, but I don't have an image and it doesn't post. So I tried holding down the memok, but when it comes back on it just goes straight to a solid led. So my system is Asus P6X58D Premium MB and my memory is Mushkin Enhanced Blackline 6GB (3 x 2GB) Model 998679 1600mhz with 7-8-7-20 timings and 1.65v. I began trying to use one stick at a time to see if it might be defective ram, but the same thing keeps happening. I know the mushkin ram is not on the QVL list, but I have heard that it can work with this board. Not sure if the ram is bad or maybe incompatible? Could also be the mobo. Besides testing the ram does anyone had any similar problems or can give me some advice?