Asus P8Z68-V Pro and 8gb (4x2gb) memory [wont boot]

Status
Not open for further replies.
Solution
Welcome to Tom's Forum! :)

First, you cannot use XMP and the RAM MUST be set manually. Next, high frequency RAM in (1) kit should yield the Rated Frequency and CAS Timings. However, when mixing, yes this is a mix you might NOT get the Rated 'per set' Frequency and CAS. In addition, you are really pushing the IMC so the VCCIO Voltage might also need to be increased to 1.20v.

DDR3-2133 9-11-9-28-2N @ 1.60v

Next, in the BIOS manually set the Frequency, CAS Timings, DRAM Voltage -> 1.60~1.65v and the VCCIO -> 1.20v.

Failure, try a more standardized JEDEC -> DDR3-2133 10-10-10-30-2N @ 1.60v <or> 11-11-11-30-2N @ 1.60~1.65v and the VCCIO -> 1.20v.
Welcome to Tom's Forum! :)

First, you cannot use XMP and the RAM MUST be set manually. Next, high frequency RAM in (1) kit should yield the Rated Frequency and CAS Timings. However, when mixing, yes this is a mix you might NOT get the Rated 'per set' Frequency and CAS. In addition, you are really pushing the IMC so the VCCIO Voltage might also need to be increased to 1.20v.

DDR3-2133 9-11-9-28-2N @ 1.60v

Next, in the BIOS manually set the Frequency, CAS Timings, DRAM Voltage -> 1.60~1.65v and the VCCIO -> 1.20v.

Failure, try a more standardized JEDEC -> DDR3-2133 10-10-10-30-2N @ 1.60v <or> 11-11-11-30-2N @ 1.60~1.65v and the VCCIO -> 1.20v.
 
Solution
Status
Not open for further replies.

TRENDING THREADS