ASUS P9X79 E-WS DIAG_CPU LED on(Blue) with NO Q-code error

devansh21

Reputable
Oct 31, 2015
2
0
4,520
Hi I have been using Asus P9x79 e-ws quite finely for the last two months with i7 4820k, but now suddenly my computer wouldn't boot up. The DIAG_LED Light is on(Blue) and there is no Q-code.Anybody who has had similar issues or can help. Thanks.
Below is my system configuration:

Asus P9x79 E WS
Intel i7 4820k
Corsair Vengeance 1833MHz 8GB * 2
Corsair RM750W PSU

 
Solution


Hi. Sorry for the late reply. It turned out that one of the power connector was not properly inserted into the socket because the wire was heavily twisted and the torsion would pull out the connector just a little bit but enough to cause this problem. Its all fine now. Thanks

devansh21

devansh21

Reputable
Oct 31, 2015
2
0
4,520


Hi. Sorry for the late reply. It turned out that one of the power connector was not properly inserted into the socket because the wire was heavily twisted and the torsion would pull out the connector just a little bit but enough to cause this problem. Its all fine now. Thanks

devansh21
 
Solution