Asus PG348Q Hz Rate Help Please

[PCDesignerR]

I have the Asus PG348Q connected to my GTX Titan X via DisplayPort, but when I press the Turbo button on the monitor it will not switch out of 60Hz and it should be able to go up to 100 should it not? Please help. Not sure if I'm just missing doing something or what not. Thanks.

 

[esco_sid]

just go to nvidia settings and manually set the HZ to 100.
its an overclockable monitor means it will set to 60hz by default unless you manually overclock it.
Oh and they usually say up to XX Hz doesn't mean it will reach it and be stable but most of them should be OK.

 

[PCDesignerR]

 

[PCDesignerR]

Ok so there is no option for setting it manually and I've tried Customize... but even setting it up to 75Hz says that it is out of range.

 

[esco_sid]

There should be a button below there that says customize.....

 

[PCDesignerR]

There IS a customize button, but it doesn't allow me to customize the Hz rating to anything higher than 60Hz because then it says, "Out of Range". As was stated above...

 

[esco_sid]

Ok look at this http://www.overclock.net/t/1602984/need-help-getting-asus-rog-swift-pg348q-to-100hz try setting it in OSD and rebooting the monitor.

 

[PCDesignerR]

Ugh! Man you are the BEST! Had to enable OC in the monitor settings. Got it to work! Thank you so much!