Asus Predator Monitor

[uprising4life]

Right Guys. This is the monitor I ordered. which says can be overclocked. Once I set it al up. noticed there is no buttons on the front of the monitor. But the buttons are on the back and the buttons are different to what showing on pic. and I cant overclock any1 got any ideas.


https://www.very.co.uk/acer-predator-xb271hbmiprz-27in-169-g-sync-gaming-monitor/1600100396.prd?_requestid=292870&Ntt=g%20sync

 

[freercurse]

Are you sure you have the correct cable does your GPU support im gues DP 1.4 and are you sure you cant find it in the options.
as long as you have a display port cable i dont see why not

 

[uprising4life]

Are you sure you have the correct cable does your GPU support im gues DP 1.4 and are you sure you cant find it in the options.
as long as you have a display port cable i dont see why not

Hi. yes I am using Display Port. There is no options to overclock. I have set it for 144hz. There is nothing in the settings for overclocking.

 

[freercurse]

You might have to change the Refresh rate in Nvidia control panel.

Here's another post for you :http://www.tomshardware.co.uk/forum/id-3557417/165hz-overclock-acer-xb271hu-whats-story.html

 

[uprising4life]

I have looked in the Nvida Control. There is no options. Only goes to 144hz. I am using Display port that came with the monitor...

 

[freercurse]

OverClock: XB271HU can be overclocked (at the end user’s risk) to a higher refresh
rate than advertised by the panel specification. This functions that allows this behavior
* After rebooting, use the NVIDIA Control Panel to set the maximum refresh rate.
If nothing is displayed, disconnect the DisplayPort™ cable and use the monitor’s
onscreen display to select a default refresh rate