Question Asus Prime X470-PRO M.2 NVME screw and/or standoff - I lost it/misplaced it

[Texavantz]

What size is it?...any pics so I can see if I still have it among other PC screw hardware.
Where can I get replacement?

 

[PC Tailor]

Should look like this roughly:

https://imgur.com/a/sY8DRj8

View: https://imgur.com/a/sY8DRj8


If you need a replacement, just contact ASUS directly. Alternatively, you can find many spares online (eBay etc.), you just want to make sure it's the correct size and thread.

 

[Texavantz]

The Asus Prime X470-PRO MB M.2 NVME installs under an M.2 Heatsink.

 

[PC Tailor]

That's what the shield in the top left of my picture above is.

https://imgur.com/a/YmA36fY

View: https://imgur.com/a/YmA36fY

 

[Texavantz]

The stand off screws into MB then install screw holds NVME to standoff?

 

[Texavantz]

https://www.ebay.com/itm/M-2-NVMe-S...148587?hash=item468ae7a8eb:g:Gj0AAOSwc6ZcOww5

 

[CountMike]

Are you trying to install second M.2 i lower spot ? Primary one and only one that runs as NVMe is top one and if it's cooler is still on that means that stand off is also there. Otherwise, bottom standoff and screw are same as top one, I screwed my in as soon as i got the MB, it doesn't get lost like that.