[SOLVED] Asus Prime X570 pro + Aerocool Eclipse 12 fans

[Millencolin]

Hope someone can give me a hand. I bought the Aerocool Eclipse 12 fans and the H66F hub to control colors. I have an Asus Prime X570 Pro, so I connected the hub with SATA power, the ARGB header into Mobo and the PWN connector also.

Problem is, colors on the fans are not showing, and control doesn´t do a damn thing. Also, Aura sync does not recognize fans.
Fans are working, some show partial colors and some are totally off.

 

[simonyeeklang]

are you sure about the rgb and argb header
I also made mistake put the ARGB to RGB fan!
Opps wrong connection.

 

[Millencolin]

are you sure about the rgb and argb header
I also made mistake put the ARGB to RGB fan!
Opps wrong connection.

Well, RGB connector has 4 pins, and ARGB connector only has 2-1, so you cannot really put them wrong there. All the fans are ARGB and the only way to connect them is by using the PWN and the ARBG connector

 

[Millencolin]

Update:

Tried just putting just 2 fans (upper ones) into the HUB and connect all 3 others into the MOBO with no lightning, and Boom they lit up the 2 on the upper part.
I was reading the ARGB strip can take up to 120 leds, and fans just have 12 of them, but for some reason, all 5 of then cannot work together on the hub even if there´s 6 ports for those !

 

[simonyeeklang]

Have tried not to put everything together instead of test individually.
See if that works.
Maybe the hub is nonconnection, or just the hub support just about there.