[SOLVED] Asus Prime z270-AR won't boot after CPU and Mem clock tweaks

[cassiones]

Hi everyone.
I have recently bought some parts to upgrade my build.
From Gigabyte h170 Gaming 3 DDR3 to Asus Prime z270-ar
From Corsair Vengeance 16gb (4x4) 1600mhz DDR3 to Corsair Vengeance LPX 16gb (2x8) 3000mhz DDR4

The rest of the build remains the same.
Power Supply - Cooler Master 650W Plus Bronze
CPU - Intel Core i5 7600k
GPU - Zotac Geforce GTX 1080 AMP edition

Right after I changed the parts it booted allright. Then I tweaked CPU and MEM clocks. It seems that after this my problems started. It booted a few times then started to turn off mid use. Whenever it try to boot it the red and yellow lights start blinking, the pc reboots, and it goes on and on.

I have already tried remove the MB battery for a reset.
I have already tried to run it with DDR in different slots, all combinations possible.
I have removed and reconnected everything back on.

Could someone please help me figure this out?

 

[alexoiu]

Power supply, CPU... hard to say. Can you test different power supply? Have you monitored the CPU temperature?

 

[cassiones]

Power supply, CPU... hard to say. Can you test different power supply? Have you monitored the CPU temperature?

Just ordered a new power supply yesterday. I may be able to check that soon.
CPU temps were fine during usage. I was monitoring on Intel XTU. Forgot to mention, CPU is water cooled with an AIO corsair H60.

 

[alexoiu]

Try checking the CPU temp under load.

 

[cassiones]

Sorry about the long time without checking this. After some more research I've found a thread that helped me.

To make it quick, the reset connector was causing some sort of short on the motherboard. Unplug and voilà. It works fine.

Ty everyone for the help.