Question ASUS Prime Z390-P not recognizing 2nd m2

[fishman123]

Hi All. Got my build up and running for the most part. I have a WD 500gb M2 card in the M2-1 slot and it is working fine. For some reason the 1TB card in the M2-2 slot isn't seen in BIOS or Windows. Not sure why. I don't see any setttings in the advanced setup to enable anything. I have unplugged and re-plugged a couple of times and still nothing. Anything special I need to be doing here?

 

[Voltzs]

What motherboard have you got,

 

[fishman123]

What motherboard have you got,

Thanks for asking. Asus Prime Z390-P

 

[Voltzs]

Anything plugged into SATA Ports??

 

[fishman123]

Anything plugged into SATA Ports??

It's a PCI M2 SSD but just in case there's nothing plugged into SATA #2 since the board instructions say if you use M2 SATA then you cannot use this port. I did notice in Windows Disk Mgmt tool it's there as "Disk 0" and says "not initialized". Disk 1 is the other M2 card and is now the C: drive.

 

[fishman123]

I got it. Looks like it allowed me to initialize and format in my Disk Mgmt tool. THX MUCH!!!