Hi
i just bought this bad boy and testing it with a loaner 12700T (i know..) and bought g.skill Trident Z5 Neo RGB 32GB for it, already had a 3070. that with a TX850 so i only use 8 pins out of the 12 on the motherboard cpu plug.
i have an m2 and 2 ssds that were working just fine in other systems now the sata drives don't show up in the new board's bios at all where as the m2 i can see in boot options and boot override, but not in the bios' advanced / nvme settings.
i of course did factory reset the board at first run. took it a bit longer to boot (i plugged in a beeper to test) at first.
basically i use the previous system that worked well untouched, but cpu-ram-mobo trio i have swapped out. ironically windows boots (and dies duh) but if i try to reinstall windows the setup doesn't see the m2 i'll use some driver for it but since the win11 is a 24h2 it should have this relatively old m2 driver in it. i may be wrong this iso is coming from an unknown source. i may should test it using the official iso too. stil.. no sata not in bios, not at windows 24h2 install / disk selection (neither F10 diskpart list disk). why?
later on i will upgrade to 13700K and rtx 5070 but 1st is $$ and 2nd is not to buy at the moment... oh well.
i just bought this bad boy and testing it with a loaner 12700T (i know..) and bought g.skill Trident Z5 Neo RGB 32GB for it, already had a 3070. that with a TX850 so i only use 8 pins out of the 12 on the motherboard cpu plug.
i have an m2 and 2 ssds that were working just fine in other systems now the sata drives don't show up in the new board's bios at all where as the m2 i can see in boot options and boot override, but not in the bios' advanced / nvme settings.
i of course did factory reset the board at first run. took it a bit longer to boot (i plugged in a beeper to test) at first.
basically i use the previous system that worked well untouched, but cpu-ram-mobo trio i have swapped out. ironically windows boots (and dies duh) but if i try to reinstall windows the setup doesn't see the m2 i'll use some driver for it but since the win11 is a 24h2 it should have this relatively old m2 driver in it. i may be wrong this iso is coming from an unknown source. i may should test it using the official iso too. stil.. no sata not in bios, not at windows 24h2 install / disk selection (neither F10 diskpart list disk). why?
later on i will upgrade to 13700K and rtx 5070 but 1st is $$ and 2nd is not to buy at the moment... oh well.
Facebook
Twitter
Instagram