[SOLVED] Asus ProArt X570 Creator Wi-Fi & G.Skill TridentZ RGB - Has anyone used this combination?

[amerifax]

>Asus ProArt X570 Creator Wi-Fi & G.Skill TridentZ RGB - Has anyone used this combination?<<

I just found out that G.Skill QVL is not listed. Has anyone used this combination?
Bob

 

[amerifax]

I decided to use Corsair CMW128GX4M4D3000C16(Ver 3.43). Hopefully, I'll have it complete by 045/23/22.
Bob

 

[CountMike]

I decided to use Corsair CMW128GX4M4D3000C16(Ver 3.43). Hopefully, I'll have it complete by 045/23/22.
Bob

If it's not too late, you can safely go with 3600MHz RAM which is really a sweet spot.

 

[amerifax]

Dam, did I mess up!
Bob

 

[CountMike]

Dam, did I mess up!
Bob

Ryzen thrives with fast RAM but until last gen Intel CPU didn't care as much. If you keep that one, at least make sure it runs with Cl as low as possible.

 

[amerifax]

OK, Count Mike, I have returned my Corsair memory, and I'm getting the G.Skill TridentZ RGB 3600. You mentioned changing the setting. I'm clueless as to what I would change. Can you give me a bit of help?
Bob

 

[CountMike]

OK, Count Mike, I have returned my Corsair memory, and I'm getting the G.Skill TridentZ RGB 3600. You mentioned changing the setting. I'm clueless as to what I would change. Can you give me a bit of help?
Bob

OK, Count Mike, I have returned my Corsair memory, and I'm getting the G.Skill TridentZ RGB 3600. You mentioned changing the setting. I'm clueless as to what I would change. Can you give me a bit of help?
Bob

Run DOCP in BIOS to 3600MHz XMP setting and see what it sets Cl to, Cl16 would be quite acceptable.

 

[amerifax]

Run DOCP in BIOS to 3600MHz XMP setting and see what it sets Cl to, Cl16 would be quite acceptable.

I've been down but back. My memory is:
G.Skill TridentZ F4-3333C 16Q2-128GTZKW DDR4-3333 Cl 16-18-18-38 1.35v PC426600 16Gx8 XMP 2.0 Ready
I hope you can help me as you did with the Corsair memory
Bob

 

[CountMike]

I've been down but back. My memory is:
G.Skill TridentZ F4-3333C 16Q2-128GTZKW DDR4-3333 Cl 16-18-18-38 1.35v PC426600 16Gx8 XMP 2.0 Ready
I hope you can help me as you did with the Corsair memory
Bob

Same thing but DOCP at 3333MHz.
DOCP/XMP are there to provide BIOS with best settings to run RAM at it's best certified performance. otherwise it would have to be done manually.