[SOLVED] ASUS ROG Maximus XI Hero stuck on A2 q-code

cvLowe

Commendable
Apr 26, 2017
9
0
1,510
Mobo: ASUS ROG Maximus XI
CPU: Intel i9-9900k
CPU Cooler: Corsair H100i
RAM: 4x16 GB Corsair Vengeance Pro RGB, 3200 MHz
SSD: Samsung 970 EVO 500GB M.2
HDD: Seagate Barracuda 2TB
GPU: MSI 2080ti Gaming X Trio

I currently am building this for a friend, can't get any signal to monitor.
As of now I am trying to boot with one stick of RAM in the primary DIMM slot, the CPU, and just the HDD
No matter what I do, how many variables I take out, I cannot get any signal to the monitor and the Q-Code is always A2 or B4

EDIT: All lights and fans come on and run fine
 
Solution
Double check that all the SATA cables, AND all other cables as well, are fully seated.

Double check that all the SATA cables, AND all other cables as well, are fully seated.

 
Solution