Hello, I've recently bought this motherboard together with the other components (everything is new)
ASUS ROG STRIX B450-F Gaming
AMD Ryzen 5 2600
KINGSTON A400 480GB SSD
Samsung 970 EVO 250GB
HyperX 16GB KIT 3200MHz DDR4 CL16 Predator RGB
MSI GeForce GTX 1070 Ti ARMOR 8G
EVGA SuperNOVA 650 G+ PSU
So after checking PSU by using the paperclip I ensured that the PSU worked. Proceeded to building outside of the sace to check if everything was fine ( checked AMD cpu for bent pins - was just fine). Used anti static strap while holding onto any of the components. Applied the CPU, thermal paste, CPU cooler, RAMs, m.2 SSD and then connected 8pin CPU to Motherboard and the 24pin MB cable aswell.After putting PSU "on" only the RBG logo near i/o shield lit up. Everything was connected just fine however after using CLRTC header to boot the system... nothing happened, No posting, no sound, no fans working.
Should I assume the Motherboard is dead?
ASUS ROG STRIX B450-F Gaming
AMD Ryzen 5 2600
KINGSTON A400 480GB SSD
Samsung 970 EVO 250GB
HyperX 16GB KIT 3200MHz DDR4 CL16 Predator RGB
MSI GeForce GTX 1070 Ti ARMOR 8G
EVGA SuperNOVA 650 G+ PSU
So after checking PSU by using the paperclip I ensured that the PSU worked. Proceeded to building outside of the sace to check if everything was fine ( checked AMD cpu for bent pins - was just fine). Used anti static strap while holding onto any of the components. Applied the CPU, thermal paste, CPU cooler, RAMs, m.2 SSD and then connected 8pin CPU to Motherboard and the 24pin MB cable aswell.After putting PSU "on" only the RBG logo near i/o shield lit up. Everything was connected just fine however after using CLRTC header to boot the system... nothing happened, No posting, no sound, no fans working.
Should I assume the Motherboard is dead?