ASUS ROG SWIFT PG278QR OSD Calibration settings

[samwt13]

Hi guys, anyone got calibration settings for a ASUS ROG SWIFT PG278QR for best colour representation? There seems to be alot of PG278Q OSD settings out there but very few specifically for the QR. I understand the panels are very similar however, there are more OSD settings avaliable on the QR and would like a definitive set for it.....

Also if there are any NVIDIA control panel settings i should be making, please include in response!

 

[Jayhawker32]

Okay, so as far as I can tell the QR uses the same panel as the Q so if you found a reliable source for calibration settings for the Q they should be identical to what you would use on the QR. I personally prefer tftcentral; that link should take you to the page for the PG278Q as I couldn't find a calibration test they did specifically on the QR likely for the reason I stated above.

 

[jacksonwarren86]

After resetting the monitor to its default settings I calibrated it using an i1Display Pro with luminance set to 160cd/m2 and got the following results:

Brightness: 31
Contrast: 50
Red: 100
Green: 98
Blue: 100

ICC profile can be found here: https://drive.google.com/file/d/1z-k-S-LZ9pMNAMyLOk_uTVYM5frHKgOT/view?usp=sharing

I also calibrated it for 250cd/m2 and got the following results:

Brightness: 58
Contrast: 50
Red: 99
Green: 94
Blue: 99

ICC profile can be found here: https://drive.google.com/open?id=1TsJvwIsVl0LEnm1J7rc85UJLbQyuQ0ot

Enjoy!