ASUS Sabertooth 990FX on Linux

jobattle

Distinguished
Jul 22, 2011
10
0
18,510
Anybody know if the ASUS Sabertooth 990FX with an AMD Phenom II 1100T is compatible with Linux (Debian)? There is a package deal at OutletPC for those components and 8GB of DDR3 for $459.00 that I was thinking about but am a little afraid to purchase.

Thanks

John Battle (jobattle@gmail.com)
 
Solution
The CPU is fine with Linux. You will of course need a video card. You may want to check this thread

http://www.linuxquestions.org/questions/linux-hardware-18/has-anyone-sucessfully-installed-linux-on-a-sabertooth-990fx-903825/

As a rule, I generally never install Linux on a motherboard that's been out for less than a year that way if there's problems there's also a thread on the internet about them :D.
The CPU is fine with Linux. You will of course need a video card. You may want to check this thread

http://www.linuxquestions.org/questions/linux-hardware-18/has-anyone-sucessfully-installed-linux-on-a-sabertooth-990fx-903825/

As a rule, I generally never install Linux on a motherboard that's been out for less than a year that way if there's problems there's also a thread on the internet about them :D.
 
Solution

jobattle

Distinguished
Jul 22, 2011
10
0
18,510
Do you (or anybody) have any suggestion for relatively high performance MOBO/CPU combinations known to work with Debian? I'm not particular whether it's an AMD or Intel and I don't necessarily want the bleeding edge, just a good solid computer the likes Linux and is a bit faster and more modern than my old system.

I do mostly FPGA development (XILINX ISE) and right now my old P4C800 system takes about six to ten minutes to do a build from my Verilog source to a device configuration file (yawn). I thought I might also use a SSHD to improve the thruput and would be interested in opinions on that as well.

My target price for the system is <$1000.00.

Thanks

John Battle (jobattle@gmail.com)

 
I would start here

http://www.linux-drivers.org/

http://kmuto.jp/debian/hcl/

Really though you're best off trolling the Debian Forums and seeing what they run. Intel boards are a bit more common so you will have some better luck as far as support. I'd stay away from boards with uncommon NIC controllers or onboard Wireless NICs