First time poster here!:
I have a set of Patriot xtreme Intel masters 4x4 2133mhz memory that isn't being read by the board. When I check the bios it says only 4gb is being read. DIMM slots used are the A1, A2, B1 and C1 as far as how the manual says I should do it. I have tried using the XMP profile but still will not read.
I've cleaned the dimms, tried re seating, installing one at a time, MemOK checks out and still nothing.
I should add with voltage set @ 1.5v it doesnt read the timing correct on the XMP profile. It should be 9-9-9-27 but it reads at 9-9-9-26 and the GHz is off when being corrected, it's at something like 2232ghz
Is their something I'm doing wrong? Please help , because I've exhausted practically all avenues.
Thanks for your time
Specs:
Asus Sabertooth x58
Intel 920 i7
Cooler Master hyper heat sink
700w PSU. (Installing 1000w)
MSi RX480
Patriot Xtreme Intel Masters 16gb 4x4 @ 2133ghz
I have a set of Patriot xtreme Intel masters 4x4 2133mhz memory that isn't being read by the board. When I check the bios it says only 4gb is being read. DIMM slots used are the A1, A2, B1 and C1 as far as how the manual says I should do it. I have tried using the XMP profile but still will not read.
I've cleaned the dimms, tried re seating, installing one at a time, MemOK checks out and still nothing.
I should add with voltage set @ 1.5v it doesnt read the timing correct on the XMP profile. It should be 9-9-9-27 but it reads at 9-9-9-26 and the GHz is off when being corrected, it's at something like 2232ghz
Is their something I'm doing wrong? Please help , because I've exhausted practically all avenues.
Thanks for your time
Specs:
Asus Sabertooth x58
Intel 920 i7
Cooler Master hyper heat sink
700w PSU. (Installing 1000w)
MSi RX480
Patriot Xtreme Intel Masters 16gb 4x4 @ 2133ghz
Last edited: