Asus Sabertooth Z77 Wont Detect Video Card

[chaoticdopey]

Ok to start i cant get my computer to boot with this video card, im currently using the onboard hdmi with the gpu inside of it, this is the weird part, it will see both of my gtx 670ftws and even sli them no problem, but it will not see my EVGA 1050ti SSC or my brand new Asus 1060 Turbo, ive deactivated on-board graphics and it still re-boots to onboard hdmi. Device manager does not see it but CPU-Z sees it but with no clock speeds or anything. i need help as i would like to start playing some games again.



Mobo: ASUS SABERTOOTH Z77 LGA 1155
CPU: i5-2500K Sandy Bridge 3.3GHz
GPU: Asus 1060 Turbo 6gb GDDR5
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB)
PSU:ThermalTake SMART 750w
HDD:Boot: Corsair Neutron GTX 240gb. Install and Storage 2x WD 1TB Red
Cooler:COOLER MASTER Hyper 212 Plus

 

[RobCrezz]

Try updating the bios on your motherboard to the newest one available, some of the modern cards just need an update.

 

[chaoticdopey]

Try updating the bios on your motherboard to the newest one available, some of the modern cards just need an update.

The bios is currently flashed to the newest bios out for this board which is version 2104

 

[RobCrezz]

Try the setting in the bios for Legacy boot.

 

[chaoticdopey]

Try the setting in the bios for Legacy boot.

ive changed the settings for pci e to legacy and uefi and still same problem, same thing if i try to save settings for pci e video boot or iGpu boot, after it reboots it goes back to Auto.

 

[RobCrezz]

Might be worth contacting Asus support seeing as its a Asus motherboard and graphics card.

 

[chaoticdopey]

Try the setting in the bios for Legacy boot.

Might be worth contacting Asus support seeing as its a Asus motherboard and graphics card.

so after waiting 3 days asus support still cant figure it out, i just bought a cheap $15 dell optiplex 390 motherboard and the damn 1060 was detected immediately, but my $250 gaming motherboard cant detect there own video card...