ASUS Sabertooth z97 Mark 1 Ram problems?

[JohnstonOctober]

I have a ASUS Sabertooth z97 I have had for a little while, Decided to upgrade my ram from my 2x4gb chips to 4x8gb chips, Was only using slots A1 and A2 before now I am trying to use slots B1 and B2 along with A's, If I put any RAM in any B slot the board will not post, Just spins up the fans and power cycles. Is there a setting in the bios I can change to get it working, I have tried reseating the CPU, No bent pins its brand new, The intercooler even tried starting it with it loose slightly, still no post. I have individually tried all the ram sticks they all work properly.

ASUS Sabertooth z97 Mark 1 with Crucial Ballistix Sport VLP 4x8gb

Dont know if it matters but I have an Intel i7 4790k with a GTX 770, trying to get it fixed cause my GTX 980 ti will be here tomorrow.

 

[smorizio]

if it a new mb see that you have the newest bios file on it.

 

[JohnstonOctober]

I have it updated that was the first thing I did, Was on like version 1008 now its on like version 1200 something.

 

[smorizio]

the last bios is 2702. try it see if anything changes. try three ram stick then four if three work it may be an issue where 4 sticks of that ram wont work. if that the issue cal lthe ram vendor up get to larger ram sticks and send the 4 back. also if it not the ram it can be bent pins under the cpu. if all ram wont work in b slots.