Question ASUS Strix RTX 3090 Repair

[thecirclebroke]

My friend fat fingered his screwdriver and knocked off a few SMDs on his BRAND NEW Strix 3090 (https://imgbox.com/jaW6O9Sm)

I tried my best to measure what is missing

SOT dim - SOT323?
Width (A) - 1.98mm
Height (B) - 1.0mm
G - 1.3mm
L - 0.65mm

SOT near it - SOT323?
Width (A) - 1.901mm
Height (B) - 0.982mm
G - 1.322mm
L - 0.6mm

Black resistors? 0402 I Think, maybe 10nF
Width - 1.0mm
Height - 0.47mm

I am ok at soldering and would like to help repair it by soldering on similar components. However my knowledge is a little low in the area of SOTs and 0402 resistors?

Does anyone know what SMDs I should purchase to solder back on?

Thanks

 

[thecirclebroke]

I think one of the near sot323 says A21, can I just get one of those?

 

[txtechlover]

Your chances of repair are extremely low. Not saying you shouldn't try, but the chances of success are near zero.

 

[thecirclebroke]

Your chances of repair are extremely low. Not saying you shouldn't try, but the chances of success are near zero.

Would it hurt to try? Or should I not damage it further by trying? It doesn't work at all, thanks

 

[txtechlover]

It depends... I would first find out what the card manufacturer would charge before touching it further. If they say they can't fix it, then you have nothing to lose since it's not working. I wouldn't try until you talked with the warranty department of the manufacturer.

 

[thecirclebroke]

It depends... I would first find out what the card manufacturer would charge before touching it further. If they say they can't fix it, then you have nothing to lose since it's not working. I wouldn't try until you talked with the warranty department of the manufacturer.

Thank you,

Yeah ASUS told us to go pound sand because its damaged by the owner...I guess we have nothing to lose at this point?

 

[txtechlover]

Yep, nothing to loose... it's toast.