computer specs are as followed.
i5 6600
h55 cooler
fury x 2x4gb ddr4 ram
cs750m psu
gtx 970.
I have just built this pc from scratch (second custom build) and I have connected all the cables to the mobo and gpu.
When i go to start up my pc everything sounds like it is booting up but I get no video signal.
I have removed the 970 and used the vga onboard graphics, still no signal.
I have tried putting the ram in 1 at a time, still no signal. DRAM LED light is solid red for 5-10 seconds then goes off competely.
I have tried an old 700w psu in my computer but still no signal.
I cannot test a new mobo or ram as I don't have any to test.
I have already tried the troubleshooting post which is found on most posts about similar issues, however nothing seem to be working.
Any suggestions?
i5 6600
h55 cooler
fury x 2x4gb ddr4 ram
cs750m psu
gtx 970.
I have just built this pc from scratch (second custom build) and I have connected all the cables to the mobo and gpu.
When i go to start up my pc everything sounds like it is booting up but I get no video signal.
I have removed the 970 and used the vga onboard graphics, still no signal.
I have tried putting the ram in 1 at a time, still no signal. DRAM LED light is solid red for 5-10 seconds then goes off competely.
I have tried an old 700w psu in my computer but still no signal.
I cannot test a new mobo or ram as I don't have any to test.
I have already tried the troubleshooting post which is found on most posts about similar issues, however nothing seem to be working.
Any suggestions?