Hello,
today I decided to update my MB BIOS to the newest version 3805 (before that I had default bios from 2015, dont know the number).
I used EZ flash 3 in BIOS, update went fine but at the end it said something along the lines of "update sucessfull, Pc will now restart" but it didn´t. It was stuck for 3-4 minutes, then I hit hard reboot.
Since then I get no signal on my monitor (using DVI / display port) neither from GPU (GTX 1070), or integrated one.
I tried clearing CMOS battery for few minutes and CLRTC pins reset, with no result.
Only thing it solved (always until next reboot) was turning off the VGA_LED - which is on pretty much constantly after reboot (and so is the Standby one)
I get no beeps on startup, every fan runs correctly and the "ornamental" LEDs on MB are blinking.
I read somewhere that later asus bios arent desingned for all procesors, but why would it give no signal to monitors?
My other specs are:
i5 6600k - Skylake
32Gb RAM
GTX1070
2*SSD
3*HDD
today I decided to update my MB BIOS to the newest version 3805 (before that I had default bios from 2015, dont know the number).
I used EZ flash 3 in BIOS, update went fine but at the end it said something along the lines of "update sucessfull, Pc will now restart" but it didn´t. It was stuck for 3-4 minutes, then I hit hard reboot.
Since then I get no signal on my monitor (using DVI / display port) neither from GPU (GTX 1070), or integrated one.
I tried clearing CMOS battery for few minutes and CLRTC pins reset, with no result.
Only thing it solved (always until next reboot) was turning off the VGA_LED - which is on pretty much constantly after reboot (and so is the Standby one)
I get no beeps on startup, every fan runs correctly and the "ornamental" LEDs on MB are blinking.
I read somewhere that later asus bios arent desingned for all procesors, but why would it give no signal to monitors?
My other specs are:
i5 6600k - Skylake
32Gb RAM
GTX1070
2*SSD
3*HDD