AT motherboard in an ATX Case

[Decimat]

I have an old intel AT board i wanna use for a nostalgia build but I hate the original AT cases + hard to find/expensive. Will an AT motherboard fit in an ATX case?

 

[cin19]

It will not fit, because the MB mounting problems, the AT MB size is bigger than the regular ATX MB, full AT board is 13.8 × 12 inches, and a Baby AT motherboard is 8.5" wide and nominally 13" long.
Baby AT http://flylib.com/books/4/57/1/html/2/images/04fig04.jpg
ATX http://www.overclockers.com/forums/attachment.php?attachmentid=81195&stc=1&d=1268760249

More info http://flylib.com/books/en/4.57.1.40/1/

 

[Decimat]

It will not fit, because the MB mounting problems, the AT MB size is bigger than the regular ATX MB, full AT board is 13.8 × 12 inches, and a Baby AT motherboard is 8.5" wide and nominally 13" long.
Baby AT http://flylib.com/books/4/57/1/html/2/images/04fig04.jpg
ATX http://www.overclockers.com/forums/attachment.php?attachmentid=81195&stc=1&d=1268760249

More info http://flylib.com/books/en/4.57.1.40/1/

 

[Decimat]

Thank you Cin19 for your answer as I was unsure what my motherboard actually was since I have never heard of Baby AT. So I bought an ATX case that has a bunch of custom hole mounts and the Baby AT board fit perfect minus the I/O portion leaving most of the top bare but i can fill that with an arduino or raspberry pi.