ATA Bus Errors

[lancededcena]

My 6Gbps problem is fixed, but I have another problem.

When I started my computer up, I keep have ATA bus errors and my hard drive keeps on turning on and off, this also happens when I am using the file manager. Also I would like to point out, when the hard drive started reciving 6.0Gbps speeds, the hard drive started to throw up these errors.

Here is the extract from the terminal:

[   10.270195] ata1.00: exception Emask 0x50 SAct 0x18 SErr 0x4090800 action 0xe frozen
[   10.271069] ata1.00: irq_stat 0x00400048, connection status changed
[   10.271926] ata1: SError: { HostInt PHYRdyChg 10B8B DevExch }
[   10.272783] ata1.00: failed command: READ FPDMA QUEUED
[   10.273643] ata1.00: cmd 60/78:18:08:81:20/00:00:58:00:00/40 tag 3 ncq 61440 in
         res 40/00:20:a8:4b:55/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
[   10.275364] ata1.00: status: { DRDY }
[   10.276217] ata1.00: failed command: READ FPDMA QUEUED
[   10.277069] ata1.00: cmd 60/40:20:a8:4b:55/00:00:05:00:00/40 tag 4 ncq 32768 in
         res 40/00:20:a8:4b:55/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
[   10.278776] ata1.00: status: { DRDY }
[   10.279624] ata1: hard resetting link
[   14.981975] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.984223] ata1.00: configured for UDMA/100
[   14.985078] ata1: EH complete

 

[Pinhedd]

My 6Gbps problem is fixed, but I have another problem.

When I started my computer up, I keep have ATA bus errors and my hard drive keeps on turning on and off, this also happens when I am using the file manager. Also I would like to point out, when the hard drive started reciving 6.0Gbps speeds, the hard drive started to throw up these errors.

Here is the extract from the terminal:

[   10.270195] ata1.00: exception Emask 0x50 SAct 0x18 SErr 0x4090800 action 0xe frozen
[   10.271069] ata1.00: irq_stat 0x00400048, connection status changed
[   10.271926] ata1: SError: { HostInt PHYRdyChg 10B8B DevExch }
[   10.272783] ata1.00: failed command: READ FPDMA QUEUED
[   10.273643] ata1.00: cmd 60/78:18:08:81:20/00:00:58:00:00/40 tag 3 ncq 61440 in
         res 40/00:20:a8:4b:55/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
[   10.275364] ata1.00: status: { DRDY }
[   10.276217] ata1.00: failed command: READ FPDMA QUEUED
[   10.277069] ata1.00: cmd 60/40:20:a8:4b:55/00:00:05:00:00/40 tag 4 ncq 32768 in
         res 40/00:20:a8:4b:55/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
[   10.278776] ata1.00: status: { DRDY }
[   10.279624] ata1: hard resetting link
[   14.981975] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.984223] ata1.00: configured for UDMA/100
[   14.985078] ata1: EH complete

Make sure that the cable is rated for SATA-III data rates. Using a SATA-I or SATA-II cable on a link capable of SATA-III will cause errors such as these.

 

[lancededcena]

Disconecting my 1tb Hard Drive works!