ATI 5770 with 3 Monitors

ohjeez

Distinguished
Nov 9, 2009
3
0
18,510
Hi Folks

I have just installed a ATI Radeon HD 5770, and connected 3 monitors. However I can not get all 3 to display at once - only 2.

I have 1 Dell U2410 connected via display port & 2 19" LCDs connected via DVI. I can not see the 3rd monitor in Windows Display Settings, nor in Catalyst Control Centre...am I missing something?
 

ordos96

Distinguished
Nov 3, 2009
72
0
18,640
Also just check on the input settings of your monitor, I have seen some of the Dell monitors that have multiple inputs not auto detect which port the signal os comming in through. Just a minor thing that can be overlooked.
 

ohjeez

Distinguished
Nov 9, 2009
3
0
18,510
Hi Folks,

I have the a Dell U2410 which has a display port output - connected to the 5770 via the supplied display port cable. The other 2 LCDs are connected via DVI.

I can only get two displays going at the same time (the Dell & 1 other), neither windows or CCC seem to pickup that I have 3 monitors plugged in.
 

ordos96

Distinguished
Nov 3, 2009
72
0
18,640
Have you swapped the monitors around to see if maybe one of the ports are bad? I am asumming that these were all monitors that you had running before hand that worked just fine. If you find out that the port isn't working then yuo can get and HDMI-DVI cable to use that port or return the card and exchange it.
 

Grega

Distinguished
Dec 27, 2009
3
0
18,510
Hello guys. To activate the third monitor also; so that you will be able to extend desktop on three and not only two LCDs, you need an ACTIVE display port adapter AND NOT PASSIVE. The difference between these two is that active one has also an usb connection because of some extra charging which will send out three DVI signals at once and not only two.

this is cable you need (avtive) http://snpi.dell.com/sna/images/products/large/330-5521temp.jpg

and this is the wrong one (passive) http://displayportadapters.com/wp-content/uploads/2009/07/Displayport-dvi-adaptor.jpg

But here is the next problem...the active port is very hard to find, and even if you will find it it will cost you from $150-$250 so, its more than one monitor.

I am from Slovenia, Europe and I am stills searching for this display port. recently, I found it here http://www.softchoice.com/catalog/en-us/cables-hp-dvi-adapter-displayport-m-NR078AA-DP7757 but it seems that the web is available only for U.S. clients.

Oh, and BTW here you have all data that you need to solve you issue http://www.amd.com/us/Documents/ATI_Eyefinity_Technology_Brief.pdf


If you are from Europe and if you will find anywhere on the web Active display port adapter, please let me know on my email grega_man@hotmail.com

Sincerely,

Grega.


P.s.: I have three LCDs here and only two works, for more than two months already:) I hope I will get this adapter very soon and you too:)
 

Jeka92

Distinguished
Dec 26, 2009
17
0
18,510
I too wanted to take this graphic card and I remember well that I had read about the specifics of this card that you can only use 2 outputs, so I think you can't do anything :(

maybe you can do something, but I am sure that is not provided by the manufacturer

EDIT: sorry maybe I confused with another ATI card, but to use 3 monitors at least one must use the "DisplayPort".
 

Grega

Distinguished
Dec 27, 2009
3
0
18,510


yes maybe you are right, but even if he is not using it, the third monitor does not work because the monitor needs an extra charging...and without usb connection he will not get it... the graphic card sends out only enough power for two monitors at the same time and not three....so his situation is even more complicated..