[SOLVED] ATX_12V_2x4 Header

[bruh1]

I am trying to plug my PSU into this mothrboard.https://www.gigabyte.com/Motherboard/H410M-H-V3-rev-10-12
There is a normal ATX power header(2x12) and a another header that says ATX_12V_2x4.
Thing is my PSU doesnt have any 2x4pins. Instead I have 2 separate pins of 2x2. Should I plug them into this header? And in what order? Or should I just leaver the header unpowered?

 

[rgd1101]

brand and model of the psu?

 

[Gam3r01]

What power supply do you have?
In most cases, the 4+4 EPS cable is designed to be used as a 4 or 8 pin hookup. You just clip them together when plugging in.

 

[bruh1]

brand and model of the psu?

Its a Antec Earthwatts 380W

 

[bruh1]

What power supply do you have?
In most cases, the 4+4 EPS cable is designed to be used as a 4 or 8 pin hookup. You just clip them together when plugging in.

Its a Antec Earthwatts 380W https://www.amazon.com/Antec-EarthWatts-EA-380D-Supply-Cooling/dp/B002UOR17Y

 

[bruh1]

brand and model of the psu?

https://www.anandtech.com/show/3902/antec-earthwatts-ea-380d-green-380w/3 According to this there is a 4+4 pin do I connect that?

 

[Gam3r01]

Yes thats the cable in question

 

[PsychoPsyops]

I ran into a similar issue when building my new pc. There is a specific order you have to follow with the pins, and in my case, the manual of either the mobo or the psu (forgot which one) had this in fine print.

 

[--SID--]

Its a Antec Earthwatts 380W

Almost 13 years old. Replace it!