Audio Drivers Won't Install for Asus Sabertooth 990fx R2.0

[Seattle206723]

Drivers won't install for the on board sound. This is New Built computer in the last 4/8/16, and the second of these computers I have built in the last 3 years.
Here's the screen shots and if anyone has seen this then the help would be appreciated.

Did all the Windows 7 updates and I'm still having the install issue with this onboard Audio. If I do it from the CD It tells me to reset computer to complete, but doesn't complete. Then I try from the unzipped folder and still same problem listed below.

Asus Sabertooth 990fx R2.0
8350 FX
970 EvGa
16GB/ 2 x 500GB SATA 850 Samsung
COSMOS II Cooler Master

http://i65.tinypic.com/4uw2gh.png


http://i66.tinypic.com/6z9anq.png

 

[Seattle206723]

Doing the Windows 7 Ultimate Updates now, had 25 to load. Maybe that's the problem with this also. Will update also, but if you know this too be the problem then chime in please.

SAME after Updates..

 

[Shaun o]

Much as I hate to point this out to you.
Why have you got the motherboards audio chip or realtek solution enabled.
And a sound blaster Audigy sound card installed. it being a Pci or Pci-e card.

You do know that will cause a conflict between the Realtek® ALC892 8-Channel High Definition Audio of the motherboard.
With the audigy card running at the same time being placed in the pci or Pci-e slot of the motherboard.

It`s no wonder the driver fails to completely install.

HD audio is the on board motherboard sound chip the Realtek® ALC892 8-Channel High Definition Audio

SB audigy is the Pci or Pci-e sound card fitted to your motherboard.

Is there a reason why you need to run the motherboards sound chip as well as the sound blaster audigy pci or pci-e based sound card at the same time ?

Or have you simply forgot that you have placed a Pci or Pci-e sound card in the system over using the motherboards sound chip solution the Realtek® ALC892 8-Channel High Definition Audio Chip ?

 

[Seattle206723]

Much as I hate to point this out to you.
Why have you got the motherboards audio chip or realtek solution enabled.
And a sound blaster Audigy sound card installed. it being a Pci or Pci-e card.

You do know that will cause a conflict between the Realtek® ALC892 8-Channel High Definition Audio of the motherboard.
With the audigy card running at the same time being placed in the pci or Pci-e slot of the motherboard.

It`s no wonder the driver fails to completely install.

HD audio is the on board motherboard sound chip the Realtek® ALC892 8-Channel High Definition Audio

SB audigy is the Pci or Pci-e sound card fitted to your motherboard.

I have a Behringer XENYX 1002B sound board hooked up to the SB Audigy on Channels 5/6 and need the Onboard for 7/8. Worked fine on my Vista Ultimate Box Cosmos I all these years. Although I added the Behringer later down the road. So if I remove the Audigy and reinstall it afterwards will the configuration work?

 

[Calvin7]

Multiple audio devices are managed in Windows Control Panel>Sound.
It appears you are using the Nvidia HDMI audio from the video card.

 

[Shaun o]

You have your answer.

 

[Seattle206723]

Multiple audio devices are managed in Windows Control Panel>Sound.
It appears you are using the Nvidia HDMI audio from the video card.

Here's a pick as the Nvidia HDMI audios are disabled. because the Flat Screen TV isn't being used any more it isn't plug into the machine. Just used it to do the initial install, and then switched back to monitor.

 

[Seattle206723]

Windows 7 Ultimate Update Fixed the issue after the 2nd Set of Downloads. I did however uninstalled the control program for Realtek, but that had no effect. The Notorious problems are fixed through the software update. My Behringer XENYX 1002B is working Excellent with SB Audio Card on my board as well now. It took 2 -3 updates to get my Audio working and a Third round of update from windows to fix the mic. Important and Optional Updates!

Loading the Card onto the board before even installing the OS helped create the problem, but the OS and Updates will see the issues and get you the updates. So if your using this type of build because you run a Online Show like I do, then put the card in afterwards and you won't have as many issues. Thank You Shaun o for pointing this out, and thus I marked you as the best solution.