[SOLVED] Auto over clocking?

[bnobe520]

I just completed my 1st build.
Ryzen 5 2600x
GeForce RTX2060
Asrock b450 itx
Corsair vengeance 3000 16gb of ddr4 ram.
I was told to download a program call CAM and Ryzen master. Upon running cam I noticed my cpu is running at 4.1-4.2 idle speed.I don’t want to over clock anything just stock. I’m new to pc gaming so I don’t want to mess anything up. Is this safe?

 

[WildCard999]

What your seeing is more then likely AMD XFR2 which auto overclocks when needed, it won't hurt anything as it adjusts the overclock based on temp/voltage. Ryzen Master is fine but if your talking about NZXT CAM software then I'd dump it as HWmonitor is much better.

https://www.cpuid.com/softwares/hwmonitor.html

I'd only use NZXT software if your using a NZXT AIO for cooling.

 

[bnobe520]

What your seeing is more then likely AMD XFR2 which auto overclocks when needed, it won't hurt anything as it adjusts the overclock based on temp/voltage. Ryzen Master is fine but if your talking about NZXT CAM software then I'd dump it as HWmonitor is much better.

https://www.cpuid.com/softwares/hwmonitor.html

I'd only use NZXT software if your using a NZXT AIO for cooling.

 

[bnobe520]

What your seeing is more then likely AMD XFR2 which auto overclocks when needed, it won't hurt anything as it adjusts the overclock based on temp/voltage. Ryzen Master is fine but if your talking about NZXT CAM software then I'd dump it as HWmonitor is much better.

https://www.cpuid.com/softwares/hwmonitor.html

I'd only use NZXT software if your using a NZXT AIO for cooling.

 

[bnobe520]

Thank you wildcard

 

[WildCard999]

Your welcome.