[SOLVED] B450 Tomahawk, no video output, CPU LED on

[eveningr]

Hi there! I've just bought all the parts of my computer and tried to assemble to no avail and I'm hoping some people could be assistance.

I've already tried different slots for my RAM and trying other PCI_E slots for my GPU. Also tried BIOS Flashback+ but the flashing light would stop after 3 flashes, presumably my MoBo is up to date?

Here is my build:

PC build is:
CPU: Ryzen 5 2600g
MoBo: MSI b450 tomahawk
RAM: Corsair vengeance RGB Pro 2x8gb
PSU: Seasonic Gold FOCUS 750FM
GPU: EVGA GeForce 1070ti Ultra Silent
Case: EVGA DG-76
Monitor: A old Asus and an equally old View Sonic (VX2433mm)
No data drive installed yet

I've also tried using HDMI and DVI cables to my monitor, will try a DisplayPort->HDMI cable whenever it arrives in the mail, but with the CPU LED on I doubt that would be the problem.

Also, I've broken 2 pins off my CPU, which really sucks and I'm hoping that's not the problem because I should at least have video output if that was the case, right?

I'll be very grateful to whoever replies. Thank you very much in advance!

 

[cin19]

I've broken 2 pins off my CPU

That is the problem, because you got the cpu LED is on, and there is not video output. Have to buy other CPU, sorry.

 

[eveningr]

@cin19

Just tried the CPU on another system, works fine.

 

[cin19]

Then you can test your part one by one in that PC to see which part has problem. Or use other CPU in your MB.