[SOLVED] B450m Steel Legends RGB wont turn on just black

[bruh000]

I recently bought a whole new b450m board and it is working fine with rgb.However, a day later when I turned the pc on, the motherboard lights don't turn on but the system can boot normally.
I tried using the command prompt and flash the polychrome utility and even clear the cmos by replacing the battery. I even tried flashing my motherboard with a previous version.
is there any other way I can fix?

 

[Jacozeelie]

Full system specs and psu make, model and condition

 

[bruh000]

Full system specs and psu make, model and condition

r5 1500x working fine
Crucial Ballistix 16GB ddr4 3200mhz ram cl16 working fine
r9 fury working fine
NZXT 650w 80plus gold psu working fine used only for a week my man I am sure it's the board

 

[Jacozeelie]

Check in the bios if the lights is still enabled. How many rgb lights is in your pc?

 

[bruh000]

Check in the bios if the lights is still enabled. How many rgb lights is in your pc?

setting back to UEFI default won't help I checked the rgb lights are set to rainbow mode (default) but the board is off .
I have a wraith prism cooler with rgb on
mb320l case with rgb off Idk why

 

[Jacozeelie]

Maybe the rgb controller died. If a bios reset dont fix it, you gonna need a new controller which you can buy or rma the mobo

 

[bruh000]

Maybe the rgb controller died. If a bios reset dont fix it, you gonna need a new controller which you can buy or rma the mobo

hello it's me again. I just replaced a new b450m steel legends. it has lights but I can't change the light mode. when I turn the psu off and back on, it just doesn't have any lights now.

 

[Jacozeelie]

That seems strange, check all the rgb wires and pluggs for damage. It seems that somewhere is a problem or there is to many lights for the rgb header.