Question Bad performance from 4090.

[madmat801]

Hi guys, I recently got a 4090. But the performance on a few games such as new world, warzone 2 etc is awful. On new world im getting around 45FPS and warzone 2 I get around 100FPS on mainly low settings. It's driving me insane and I'm hoping some very smart people can help me out here. My system - Asus B450f-gaming MB, 5800x, 32GB of ddr4 3600mhz RAM, RTX 4090, 1TB m.2 storage and a NZXT Kraken Aio cooler.

 

[madmat801]

I also play at 1440p.

 

[WildCard999]

PSU make/model?

Is the 4090 new or used?

 

[madmat801]

PSU make/model?

Is the 4090 new or used?

PSU is corsair HX1000 platinum. and the 4090 is new

 

[WildCard999]

PSU is corsair HX1000 platinum. and the 4090 is new

Ok, I'm going to ask some basic questions that may seem dumb but I just want to cover all basis.

-Newest drivers installed?
-Correctly connected to PSU?

Using a program such as HWmonitor, what GPU usage are you seeing while gaming? Max temps?

 

[sizzling]

Can you run userbenchmark and share the public link to the results.

 

[madmat801]

Ok, I'm going to ask some basic questions that may seem dumb but I just want to cover all basis.

-Newest drivers installed?
-Correctly connected to PSU?

Using a program such as HWmonitor, what GPU usage are you seeing while gaming? Max temps?

Yes the latest drivers are installed.
As far as im aware everything is connected properly.

GPU usage is around 47%
Temps 40 degrees C

 

[XxDarkMario20xX]

Have you done DDU in safe mode before you bought the new GPU

 

[madmat801]

Can you run userbenchmark and share the public link to the results.

Have you done DDU in safe mode before you bought the new GPU

No i did not. Didnt think this would cause such problems.

 

[XxDarkMario20xX]

No i did not. Didnt think this would cause such problems.

If you have GPU before best to use DDU in safe mode to remove all the last GPU drivers and ready to install your brand new GPU

 

[madmat801]

Can you run userbenchmark and share the public link to the results.

UserBenchmarks: Game 241%, Desk 93%, Work 239%
CPU: AMD Ryzen 7 5800X - 90.3%
GPU: Nvidia RTX 4090 - 278.2%
SSD: Addlink M.2 PCIE G3x4 NVMe 1TB - 23.7%
SSD: Crucial MX500 1TB - 61.5%
HDD: WD Blue 1TB (2012) - 81.3%
RAM: G Skill Intl F4-3600C18-16GTZN 2x16GB - 79.4%
MBD: Asus ROG STRIX B450-F GAMING

 

[WildCard999]

Yes the latest drivers are installed.
As far as im aware everything is connected properly.

GPU usage is around 47%
Temps 40 degrees C

If that's the usage while gaming then something is wrong there, it should be much higher in the 90%+ range.

Can you post the link to those userbenchmark results?

 

[madmat801]

If that's the usage while gaming then something is wrong there, it should be much higher in the 90%+ range.

Can you post the link to those userbenchmark results?

https://www.userbenchmark.com/UserRun/59297517

 

[Kona45primo]

Background CPU usage at 34%

Try running again with after a fresh boot.

Also take a look at background programs that are running.

 

[madmat801]

Background CPU usage at 34%

Try running again with after a fresh boot.

Also take a look at background programs that are running.

https://www.userbenchmark.com/UserRun/59299383

This is after a fresh boot.

 

[logainofhades]

That nearly full NVME drive is not doing you any favors. If your games are on that drive, move some over to the MX500. An SSD should not be filled past 80% of its rated capacity.

 

[drivinfast247]

RAM installed in slots a2-b2?

Do you have any sort of "overclock" on CPU?

 

[madmat801]

That nearly full NVME drive is not doing you any favors. If your games are on that drive, move some over to the MX500. An SSD should not be filled past 80% of its rated capacity.

Okay I'll sort this out. thanks

 

[madmat801]

RAM installed in slots a2-b2?

Do you have any sort of "overclock" on CPU?

Yes RAM is in the right slots.

No But I did increase the cpu ratio so it boosted to 4.6ghz as it was stuck at 2.3ghz for some reason.

 

[logainofhades]

Is XMP enabled, for your ram?

 

[madmat801]

Is XMP enabled, for your ram?

Yes XMP is enabled.

 

[Kona45primo]

Better. I would look into using DDU as stated above, it's pretty helpful, sometimes. Also look into "render worker count" for warzone 2. Sometimes playing around with that can help.

Although warzone is odd, between low and high settings ive noticed only around 20-30 fps difference.

 

[drivinfast247]

Yes RAM is in the right slots.

No But I did increase the cpu ratio so it boosted to 4.6ghz as it was stuck at 2.3ghz for some reason.

Reset BIOS to default settings and then enable D.O.C.P

 

[madmat801]

So I have literally tried everything that has been suggested in this post. Thanks for trying guy but I’m still only getting really low fps. Could it be my 5800x is holding the card back that much ?

 

[drivinfast247]

So I have literally tried everything that has been suggested in this post. Thanks for trying guy but I’m still only getting really low fps. Could it be my 5800x is holding the card back that much ?

Not at all. So you made sure RAM is installed in slots a2-b2? You made sure to reset BIOS to default settings? You enabled PBO? You enabled D.O.C.P?

Run UB again and link the results.