I have run ASUS motherboards for at least 15 years but that will be come to a end. I was running a ASUS Rampage IV Extreme for the past 10 months. I run a PC Power & cooling Silincer 950W ( Certified at 1380W ) EVGA GTX 570 Classified 975/2341@1,113 volts(the highest the OC tuner will allow and they are also in SLI 16X / 16X , Intel 3930K@5.yways 2Ghz with 1.42 volts , RevoDrive3X2 480 but its a bit of a freak in ATTO benchmark I get 3.8MB/s Read and a steady 950MB/s Write. ADATA 60BG boot drive. Liquid silicone cooled PCXS RX 360 ran to the XSPC full coverage video cards that reached a max of 24C/25C to a older MCP600 pump to aCooltherm 240 dual colesore and then to a COOLGATE 480 Triple core to a MCP655 pump to a EK-Supream HF copper nickle plated modded the jet with two 1/2 inch CPU 30C is max it has ever reached and the to a resevior with fish tank filter material. I uae Weskwood 600 Brahe fluid ( works better then water ) . Then 1 day i updated the bios to the new 1202 and got a 01 earror so RMAed wouldn't installed Window's 7 so RMAed again np but it had a old bios so decided to update to 1202 again and what do you think ? 01 error RMAed again but this time it had scratched taces bent pins broken hold down and if I wanted it fixed I would have to pay for a new motherboard . I have pictures of the socket showing it perfect like the ones before. Should I take them to court or not ? I am getting either a Bigbang Power II or a EVGA Classified anywaould I make a but should I make a point and sew them or forget it ? What do you think . I would like your opinions please.