BD_ROM not functioning correctly

[flying_squid]

I upgraded to windows 10 a while back and haven't had any problems until this point. I used by current drive (Pioneer BD-ROM BDC-202 ATA Device) to install a fresh windows 7 before upgrading. Recently I tried burning a DVD only to get the "Windows can't read the disc in drive H:/" I know my drive works because it recognizes there is a disc there, I even tested another drive in the same pc with the same result. I have also tried different sata cables and ports. I put in a movie (Sherlock Holmes, Blu-Ray) and all I was able to do was open the folder to view the files but was not able to watch the movie (I also tried a non Blu-Ray disc). I Have tried reinstalling the drivers with no avail. I know this a problem with windows 10 but I can't find a solution. Help would be greatly appreciated.

 

[Dark Lord of Tech]

(Pioneer BD-ROM BDC-202 ATA Device).....I have one of these from newegg on my shelf , stopped reading any disc after 3 months.

 

[flying_squid]

I originally thought it was the drive. That's why I pulled a working one from my brothers pc to check. And I get the exact same results

 

[Dark Lord of Tech]

Could be a corrupted driver.

 

[flying_squid]

Could be a corrupted driver.

I've reinstalled them

 

[Dark Lord of Tech]

I tried everything on mine , still on the shelf , tried in a new build , still wouldn't run.

 

[flying_squid]

I tried everything on mine , still on the shelf , tried in a new build , still wouldn't run.

Even if that's the case with this one, that doesn't explain the other drive. A tested and working drive in my brothers pc.