Beeping on POST

[Versydon]

So i just built my new PC and i am getting beeps with no visual on my monitor, i have reset the BIOS, reseated the RAM and GPU and i am truly stuck. I cant google the beep code because i cant Decipher it. It sort of goes like 2 quarter of a second beeps and then 8 regular beeps then after about ten seconds another beep, fans and LEDS are lighting aswell. I need to learn to decipher beep codes... Any help is much appreciated.

 

[rounakr94]

Please post your system specifications when you have a problem And this should help you http://www.computerhope.com/beep.htm

 

[Versydon]

http://es.pcpartpicker.com/p/LQ7VrH

 

[Shaun o]

I have to ask,

Have you read the motherboard manual from front to back first of all.
I only say because spending a bit of time reading the whole manual can often provide you with the answer as to why things are not working as expected, if a first time build. Or a completely new setup.

 

[smorizio]

ckeck with the mb guild make sure your cpu is supported. check what bios rev is needed for the cpu. if the cpu is at a bios rev that will let it post. pull the gpu and any other wire that might look like it shorting out. pull the gpu and make sure one ram dimm is locked in. see if onboard video comes on. if not pull the gpu and breadboard it. make sure it posts outside the box