Bequiet! Shadow rock 2 only pull setup for heat sink

[Martin Plume]

Hi,

Planning to build my pc over the weekend. Due to various reasons I was wondering if it is possible/wise to use Bequiet! Shadowrock 2 provided fan as pull on the heatsink in upwards direction.
The case itself is well ventilated NZXT 410 Tempest with 6 fans:
Intake:
2 x Corsair AF120 Quiet edition in the front
1 x NZXT 120mm on the bottom
Exhaust:
1 x NZXT 120mm in the back
2 x Corsair AF140 Quiet edition on the top

Sorry for my English, it is not my native language.

Build:
Asus H97-Pro gamer
I5-4590
Asus GTX960 Strix OC 2gb
Corsair Vengeance 2x4gb
Samsung 850 EVO 250GB
WD Blue 1TB 7200
Corsair CX500M
Previously mentioned NZXT 410 Tempest case

 

[popatim]

Sure, pull usually works slightly better than push anyways so you should be golden.