Best way to power cards in SLI

[neieus]

I'm trying to decide which is the best way to power my GTX 970's in SLI. Is it better to have the 6 and 8 pin connector coming off the same cable to the same card or does it matter? Right now I'm using the 6 pin from one cable powering both cards and the same for the 8 pin. I apologize if I'm confusing but please look at the pic blow it might help explain.

https://drive.google.com/file/d/0B-dTw0R3t2IjbEdrSzFTTEFGekU/view?usp=sharing

My current specs are listed in my sig below and please excuse the mess I'm still working on cleaning cables up.

 

[bignastyid]

It doesn't really mater how the cables are attached. However you may want to start looking into a new PSU. Under the load that system is going to pull the caps in the CX probably aren't going to last long.

 

[neieus]

Thanks for the reply and yes a new PSU is on my to do list but not a major issue at this time since my peak power draw is about 530w. I'm not overclocking the GPU's so I should be fine for the time being but it will get replaced eventually.