BIOS Black Screen

[Nuxior]

Guys I have big problem, i messed up my bios settings because i've setted up something like "set multiple displays" or something like that in Asus z170-a motherboard, now i can't access to the bios because its all black screen but system is turning on, guys what can i do i really need my pc right now and because of my stupidity ( I was curious about that setting because I have 2 monitors) someone can help me?

 

[rgd1101]

reset the bios. or try using just the igpu

 

[Nuxior]

reset the bios. or try using just the igpu

Hello!
Can you explain me how to use igpu?
edit: already tried integrated gpu but it also didn't work.

 

[rgd1101]

reset the bios. or try using just the igpu

Hello!
Can you explain me how to use igpu?

plug the monitor to the motherboard video output.

 

[smorizio]

open the mb guild that cam with the mb. look for onboard jumpers. look for the clear cmos jumper. move the jumper with the power off the clear the bios.

 

[Nuxior]

reset the bios. or try using just the igpu

Hello!
Can you explain me how to use igpu?

plug the monitor to the motherboard video output.

Still the same, can't even turn on the system in igpu

 

[Nuxior]

open the mb guild that cam with the mb. look for onboard jumpers. look for the clear cmos jumper. move the jumper with the power off the clear the bios.

I cannot locate this, can u give me some details?

 

[smorizio]

bottom right look for the rtc switch below it and above the case cables is two pin clrtc. take power off the pc use a screw driver to short two pin for 10-20 sec. then power on and reset the bios.

 

[rgd1101]

https://www.asus.com/us/Motherboards/Z170-A/HelpDesk_Manual/
in the manual

 

[Nuxior]

bottom right look for the rtc switch below it and above the case cables is two pin clrtc. take power off the pc use a screw driver to short two pin for 10-20 sec. then power on and reset the bios.

I dont know if i understood correctly, u mean just to simply touch these 2 pins with screw driver?

 

[Nuxior]

Guys, after some thing i finally made it, the Asus logo appears but there's a problem.. because when i try to start my pc, everything works fine till boot device led, it stays red and for about 5-10mins my pc is stucked at asus logo then system starts 🙁

Update: Reasembled everything and computer runs perfectly, thanks guys 😉

( I feel really bad with that i can't give both of you "Solution" mark )