Question Bios corrupted ?

Nov 9, 2020
5
1
15
So I tried to update my h310m H bios using the gigabyte utility software it was working fine and then suddenly the windows ran into a problem screen came up and my pc turned off after that i am legit getting no response from my pc not a single fan or light turn on when i press the power button
What can i do? is it bricked or is it something else?
I tried resetting the cmos but still no response at all
 
Last edited:
Remove power from the wall, remove the CMOS battery and reset the CMOS by jumper

insert the battery again (plus visible), remove the short/jumper from the clear cmos pins, try powering on again

if this doesn´t help
remove all not necessary devices, only use:
motherboard, cpu with cooler and fan, one RAM, PSU

which CPU are you using?
 
Remove power from the wall, remove the CMOS battery and reset the CMOS by jumper

insert the battery again (plus visible), remove the short/jumper from the clear cmos pins, try powering on again

if this doesn´t help
remove all not necessary devices, only use:
motherboard, cpu with cooler and fan, one RAM, PSU

which CPU are you using?
Using intel i5 9400f
 
then you need the GPU to be installed in the minimum setup as well

Which BIOS version did you try to install?

Do you have a 8th gen CPU?
I tried to install f15b version of bios But i used the gigabyte utility software to install But the windows screen (your pc ran into a problem showed up) and it turned off after that it is not giving me any kind of response