Many times when the CMOS battery gets low the BIOS will revert to its default settings. I would change it.Hi guys,
can you please help me?
After time to time my bios set up into default mode, after starting PC or after restarting windows? Any help? Why?
I have i7 6700K with MB Z270-Ultra Gaming, i have OC on 4,6Ghz/1,38V.
That board is not really old enough to need a new battery but you can try it.
Most boards will reset itself because of a unstable overclock. 1.38 volts is high just for 4.6.
Are you overclocking your memory?
Leave your memory at default speed or add 0.02 volts to it and see if that fixes it.Everything is fine, i played games, i used PC to everything. This problem is only when i starting or restarting PC but no always. 4,6Ghz/1.38V/Tepms 70degree, i think isn´t problem with OC, i used stability test in OCCT. My memory is in XMp profile 3200Mhz
Ok i will try it, But i don´t understand why is this problem only in starting or restarting windows. (after time to time). Why isn't this problem always after the start and restart?Leave your memory at default speed or add 0.02 volts to it and see if that fixes it.
That would be my first thought unstable memory that's why I specifically asked about the memory.
Not really it could be right on the edge of being stable all the time but fail sometimes.Ok i will try it, But i don´t understand why is this problem only in starting or restarting windows. (after time to time). Why isn't this problem always after the start and restart?
Memory can fail on a cold boot but run fine after it warms up a bit.
- Would this problem have to happen every time I run a PC every day?
Ok, how much can i add? I think now is 1.35V with 3200Mhz. Can i change it to 3000Mhz and 1.37V?Not really it could be right on the edge of being stable all the time but fail sometimes.
I would add the 0.02 volts or either try it at 3000 with the same timings and voltage as you had it at 3200.
|Thread starter||Similar threads||Forum||Replies||Date|
|D||[SOLVED] Motherboard resorts to default settings after unplugging PSU||Systems||2|
|M||Question "Load optimised defaults" box||Systems||0|
|[SOLVED] how to set default installation directory ?||Systems||3|
|F||Question Reset bios to default now pc says I have no os?||Systems||10|