BIOS didn't show up after finish build up my new PC

sangoker

Commendable
Dec 13, 2016
28
0
1,530
Hey!!
It's took for me like 6 hours to build up my computer cuz i like to be sure about everything im doing
It's my first time ,i use the all instrucstions
My computer
============
intel i7 7700k
Cpu cooler enermax BK
Motherboard astrock z270 KILLER SLI
GTX 1070 gigabyte with 3 fans
Power supply EVEA 750W
16 GB RAM G Skill ripjaws V 3200Ghz 8X2
SSD samsung v nand 850
And case DIY PC D480-W with fan controller
@@@@@@@@@@@
So i finish build up I connect the power supply to the wall and tge all light and fans came up
shoed up
I connect to display port to the back of the graffic card ,connect it to the monitor
The monitor will find out it a new connect to display port
I clicked yes ,and then the monitor said "no signal"
This monitor working well with my other laptop pc
.I tried to remove the battery
Tried to use the extenion cable for the CPU and connect to the 8 pins on the motherboard
Tried to remove one ram
I even remove the ram from the second gap ,in install it on the thirt one ,but still ,all the fans working ,and i also see the motherboard blicking on red (that's nice) but BIOS didn't show up
I didn't heard no BIP when i turn on the computer
I do connect the speaker thing to the motherboard
Please help me!

 
Hey guys sorry for voted down i just don't know how to quote
Ok for the first question i just removed the DDR RAM and it's make like 3 beeps ,but the computer still on
For the second one ,what is the button on the motherboard?
and u mean i can still see BIOS when the only motherboard PSU and SPU on?
 
What eles can be the problem??? I want this computer work!!!! Im wating for it 6 months i cant wait no more!!!!!!!!!!!!!!!!!!!
It possible the power stwich hd led and speaker (little cables on the side) got wrong?
Or if the was wrong the error wasent red blinking on the modo?
Please help!!!
 
I will tonight
One more thing to be honest ,but i make it clear
The CPU cooler has something with the screws when i go to the back of the motherboard to install the plastic piece for the cooler its showed "this side for intel" and "this side for AMD" now the side for intel has space between the plastic piece to the motherboard , so when i connect it and put the screws on the 1151 hole , i put the black things from the other side but it didn't reach to the other side , the long screws from the other side (front) was too short, so i took the plastic on the back of the motherboard ,and i flip it that way is shows me "this side for AMD" and i put tge screws on the 1151 hole , and then its reach with the black plastics to the other side ,i tight the hole front screws up with a screws driver , and i put the thermal and put the CPU cooler ,and everything , the CPU cooler site tight his not moving at all , like it's one piece of the motherboard
 
For czar357
1.) What is the power botton on the motherboard
2.)and actually what im suppost to see to know is that ok?
Or actually what cables you want me to keep in connect to the motherboard?