BIOS doesn't see hard drive, win 7 installer does. Can't format it or anything.

m1r0k0v

Reputable
Nov 8, 2014
3
0
4,510
So I'm building a desktop for the first time in years and having issues. My hard drive is detected in the "boot order" options, yet when i go into storage under advanced settings in BIOS, it doesn't appear. Then, when I get into the win 7 installer, it can see the drive but I can't install to it because ""Computer's hardware may not support booting to this disk. Ensure the disk controller is enabled in the computer's bios menu." I took the hard drive out and hooked it up in the family desktop but it doesn't see it in "my computer" or the disk management window. Thoughts?

PCPartPicker part list[1] / Price breakdown by merchant[2]
Type Item Price
CPU Intel Core i5-4440 3.1GHz Quad-Core Processor[3] $194.99 @ Newegg
Motherboard ASRock B85 Pro4 ATX LGA1150 Motherboard[4] $80.66 @ Newegg
Memory Team Zeus Red 8GB (2 x 4GB) DDR3-1600 Memory[5] $74.99 @ Newegg
Storage Western Digital BLACK SERIES 1TB 3.5" 7200RPM Internal Hard Drive[6] $74.97 @ OutletPC
Video Card MSI GeForce GTX 770 2GB Video Card[7] $282.98 @ SuperBiiz
Case Corsair 200R ATX Mid Tower Case[8] $49.99 @ NCIX US
Power Supply EVGA 500W 80+ Bronze Certified ATX Power Supply[9] $29.99 @ Amazon
Optical Drive Pioneer BDR-209DBK Blu-Ray/DVD/CD Writer[10] $54.99 @ Newegg
Monitor Asus VS229H-P 21.5" Monitor[11] $139.98 @ Amazon
Wireless Network Adapter Asus PCE-N15 802.11b/g/n PCI-Express x1 Wi-Fi Adapter[12] $27.14 @ Mwave
 
Hello... Is this a new Hard drive? No previous format or Data on it?
1) what is your SATA controller set at in your BIO's IDE or AHCI ? AHCI will need your MB "ahci/sata" driver installed before Windows will load on it. IDE will not need a driver.
2) as a security feature you must "mark the partition active" in the "Disk management" in a already installed Windows computer... to be seen.
 
Hi

Install wd datalife guard for window on working PC
See problem hard drive is connected to sata port which is enabled
And sata power supply connector

Check it is seen by bios as you boot up or in bios hard drive section

Then run data lifeguard to test drive it will tell you if working or not

If it is working then partition and format ( long ) in working family PC before moving back to new PC

If it has problems in 2 different PC's it is probably dying even though brand new

Regards
Mike Barnes

 

m1r0k0v

Reputable
Nov 8, 2014
3
0
4,510


Cannot format. If I select new, it comes up with an error code 0x8007045d
 

m1r0k0v

Reputable
Nov 8, 2014
3
0
4,510


It is set to AHCI. When I selected IDE in BIOS, it still didn't detect it. Do I need to select it and restart the computer for it to come up?