BIOS Menu

[Railerzbc]

Odd happening wit hmy Mouse while in the BIOS Menu; Cursor Moves Across Screen By Itself!

Just built an system; i7 2600k 3.4gb/SAbertooth P67 mobo/8gb DDR3/64gb Patriot SSD primary/WD 1TB Secondary Raid/GTX 480 Vid/Wireless Mouse & Keyboard/64bit Windows 7 Home.

Been up and running for week, serveral reboots, with no issue. Ran Asus AI Suite utility, but only changed the logo and updated the BIOS from 1502 to the 1602 firmware.
Now, after two successful reboots, I can sometimes get a "No NTLDR (detected)? and black screen. When I do get into the BIOS off CNTL/ALT/DeL, I have a crazy mouse ?!? Moving away from my choices, either left or right in a staggered stepping motion?! I also find my Boot order is sometimes changed from SSD to Disc?!
Can my Flashed firmware be buggered? WAs it a regression instead of an improvement?
-I only went ahead with the update because my mobo is a REV 3.0, but the BIOS only showed a REV 1.0, thought the update was needed.

 

[Pyree]

Try to put your mouse on a dull, non waxy/reflective surface.

 

[Pyree]

Also see if dust build up on lense.

 

[Railerzbc]

Did some checking whilst in the BIOS and discovered the fault behind the magical moving mouse; it was driver related. My mouse and keyboard are wireless, when in the BIOS menu though, the drivers must be not getting a 'full' load, or something. Unplug the wireless gear and use an old wired cheapee; Fixed. After I'm done in the BIOS menu, I just plug the wireless transmitter back in & business as usual.

 

[Railerzbc]

Best answer selected by Railerzbc.