BIOS ROM Checksum Error

G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

I bought my new PC about a month ago and just received a floppy with
the latest BIOS on it (Award BIOS v5.3). I therefore phoned up my PC
manufacturer's technical support (they sent me the floppy in the first
place) and went through the whole flash process with them. Everything
seemed to go okay (they were no errors and the process completed) but
the PC will now longer boot. Instead, I it starts the BIOS BootBlock
program, displays the "BIOS ROM Checksum Error" and asks me to insert
a system disk. When I boot from the floppy, I can get back into the
Award Flash utility (AWFLxxxx) and DOS, but only the A:\ drive is
present. The PC manufacturers are sending out an engineer, but that's
not for a week. So in the meantime, I was wondering if there was
anything to do to rectify the situation. My questions are therefore:

1. What would cause the flash to fail in the first place? As I
mentioned above, the whole process seemed to go smoothly. I've flashed
other devices before (though never a BIOS), but all throught the
process, I was following instructions from technical support.

2. Is there are way I can recover from this, or should I just wait for
the engineer? I tried to reflash the BIOS, but it just hangs when it
gets to the flashing stage.

My apologies for not being very detailed, but I'm currently typing
this at work, so I haven't got all the information in front of me. I
think the motherboard is the MSI-6729 (Athlon XP 3000 processor).

Thanks in advance,
Oliver
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

"olli" <olippold@hotmail.com> wrote in message
news:bb65d8d2.0405240016.2e3e5340@posting.google.com...
> I bought my new PC about a month ago and just received a floppy with
> the latest BIOS on it (Award BIOS v5.3). I therefore phoned up my PC
> manufacturer's technical support (they sent me the floppy in the first
> place) and went through the whole flash process with them. Everything
> seemed to go okay (they were no errors and the process completed) but
> the PC will now longer boot. Instead, I it starts the BIOS BootBlock
> program, displays the "BIOS ROM Checksum Error" and asks me to insert
> a system disk. When I boot from the floppy, I can get back into the
> Award Flash utility (AWFLxxxx) and DOS, but only the A:\ drive is
> present. The PC manufacturers are sending out an engineer, but that's
> not for a week. So in the meantime, I was wondering if there was
> anything to do to rectify the situation. My questions are therefore:
>
> 1. What would cause the flash to fail in the first place? As I
> mentioned above, the whole process seemed to go smoothly. I've flashed
> other devices before (though never a BIOS), but all throught the
> process, I was following instructions from technical support.
>
> 2. Is there are way I can recover from this, or should I just wait for
> the engineer? I tried to reflash the BIOS, but it just hangs when it
> gets to the flashing stage.
>
> My apologies for not being very detailed, but I'm currently typing
> this at work, so I haven't got all the information in front of me. I
> think the motherboard is the MSI-6729 (Athlon XP 3000 processor).
>
> Thanks in advance,
> Oliver


If you can enter the bios then the first thing to do is reset it (your
better off doing this from the motherboard BUT I wouldnt say do it if you
have a contract)..
Instead when you enter the bios tell it to reset to default
after your done with that then detect new drives.

IF it gives a checksum error every boot then that's not good (but resetting
it via board might fix)..
Basically you can have values (settings) that were written pre-update and
they have stayed and now some of those values might not be used (or might
even have changed structure)..
So if you can enter bios, then reset to default, look for new drives, then
reboot and see if it works.
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

"rstlne" <.@text.news.virgin.net> wrote in message
news:NEGsc.373$_%5.213@newsfe2-gui.server.ntli.net...
> "olli" <olippold@hotmail.com> wrote in message
> news:bb65d8d2.0405240016.2e3e5340@posting.google.com...
> > I bought my new PC about a month ago and just received a floppy with
> > the latest BIOS on it (Award BIOS v5.3). I therefore phoned up my PC
> > manufacturer's technical support (they sent me the floppy in the first
> > place) and went through the whole flash process with them. Everything
> > seemed to go okay (they were no errors and the process completed) but
> > the PC will now longer boot. Instead, I it starts the BIOS BootBlock
> > program, displays the "BIOS ROM Checksum Error" and asks me to insert
> > a system disk. When I boot from the floppy, I can get back into the
> > Award Flash utility (AWFLxxxx) and DOS, but only the A:\ drive is
> > present. The PC manufacturers are sending out an engineer, but that's
> > not for a week. So in the meantime, I was wondering if there was
> > anything to do to rectify the situation. My questions are therefore:
> >
> > 1. What would cause the flash to fail in the first place? As I
> > mentioned above, the whole process seemed to go smoothly. I've flashed
> > other devices before (though never a BIOS), but all throught the
> > process, I was following instructions from technical support.
One (unfortunate) possibility, is that some machines take several seconds to
actually finish writing the BIOS, after the process has apparently
completed. It is fairly common to get this type of error on these...
An other possibility is that the flash utility itself had a problem.
The other very common problem (in the past, relatively rare now), is that
some cards, can cause problems with the BIOS flash. It is allways best to
have the machine fairly 'bare' when flashing. For instance, in the past
there was a similar problem on some Asus boards, when certain Adaptec cards
were present. What appeared to be happening, was that the flash utility
attempted to use part of the memory map, that was occupied by this card, for
temporary storage during the flash, and the data then got corrupted...
Probably the most likely problem though, is that there is actually a fault
in the flash chip, which has now shown up. :-(

> > 2. Is there are way I can recover from this, or should I just wait for
> > the engineer? I tried to reflash the BIOS, but it just hangs when it
> > gets to the flashing stage.
Is there a slightly older BIOS, and possibly another copy of the flash
utility on the web?. If so, try making a disk carrying these.

> > My apologies for not being very detailed, but I'm currently typing
> > this at work, so I haven't got all the information in front of me. I
> > think the motherboard is the MSI-6729 (Athlon XP 3000 processor).
> >
> > Thanks in advance,
> > Oliver
>
>
> If you can enter the bios then the first thing to do is reset it (your
> better off doing this from the motherboard BUT I wouldnt say do it if you
> have a contract)..
> Instead when you enter the bios tell it to reset to default
> after your done with that then detect new drives.
You are talking about the _CMOS_ setup here, not the 'BIOS'. Though it is
good advice to allways do a CMOS setup after flashing a new BIOS
(unfortunately the meaning of some CMOS bits can change from version to
version), a BIOS checksum error, has nothing to do with the CMOS.

> IF it gives a checksum error every boot then that's not good (but
resetting
> it via board might fix)..
> Basically you can have values (settings) that were written pre-update and
> they have stayed and now some of those values might not be used (or might
> even have changed structure)..
> So if you can enter bios, then reset to default, look for new drives, then
> reboot and see if it works.
If the error is a CMOS checksum error, rather than a BIOS checksum, then
this would apply. However the message being described is long before the
CMOS handling is even reached. Most BIOS's have a basic 'boot block', which
contains support only for the floppy device, and to talk to the screen in
basic EGA mode. This remains unchanged normally when flashing the rest of
the BIOS. This code is (just) enough to allow the machine to boot a floppy,
and reprogram the BIOS. This code is executed before the CMOS is accessed,
with the machine normally running in it's slowest speed, and tests the
checksum of the main BIOS, and executes this if the checksum is OK. It is
this that is still running.

Best Wishes
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

Just one quick question...

Do you have any other boot roms on cards in the PC; such as Network or
raid/SCSI cards. If so just check that those cards are firmly in their
slots...

CrimsonLiar

"olli" <olippold@hotmail.com> wrote in message
news:bb65d8d2.0405240016.2e3e5340@posting.google.com...
> I bought my new PC about a month ago and just received a floppy with
> the latest BIOS on it (Award BIOS v5.3). I therefore phoned up my PC
> manufacturer's technical support (they sent me the floppy in the first
> place) and went through the whole flash process with them. Everything
> seemed to go okay (they were no errors and the process completed) but
> the PC will now longer boot. Instead, I it starts the BIOS BootBlock
> program, displays the "BIOS ROM Checksum Error" and asks me to insert
> a system disk. When I boot from the floppy, I can get back into the
> Award Flash utility (AWFLxxxx) and DOS, but only the A:\ drive is
> present. The PC manufacturers are sending out an engineer, but that's
> not for a week. So in the meantime, I was wondering if there was
> anything to do to rectify the situation. My questions are therefore:
>
> 1. What would cause the flash to fail in the first place? As I
> mentioned above, the whole process seemed to go smoothly. I've flashed
> other devices before (though never a BIOS), but all throught the
> process, I was following instructions from technical support.
>
> 2. Is there are way I can recover from this, or should I just wait for
> the engineer? I tried to reflash the BIOS, but it just hangs when it
> gets to the flashing stage.
>
> My apologies for not being very detailed, but I'm currently typing
> this at work, so I haven't got all the information in front of me. I
> think the motherboard is the MSI-6729 (Athlon XP 3000 processor).
>
> Thanks in advance,
> Oliver
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

"CrimsonLiar" <trash@trash.com> wrote in message news:<osPsc.178$XI5.18@newsfe2-win>...
> Just one quick question...
>
> Do you have any other boot roms on cards in the PC; such as Network or
> raid/SCSI cards. If so just check that those cards are firmly in their
> slots...
>
> CrimsonLiar
>
> "olli" <olippold@hotmail.com> wrote in message
> news:bb65d8d2.0405240016.2e3e5340@posting.google.com...
> > I bought my new PC about a month ago and just received a floppy with
> > the latest BIOS on it (Award BIOS v5.3). I therefore phoned up my PC
> > manufacturer's technical support (they sent me the floppy in the first
> > place) and went through the whole flash process with them. Everything
> > seemed to go okay (they were no errors and the process completed) but
> > the PC will now longer boot. Instead, I it starts the BIOS BootBlock
> > program, displays the "BIOS ROM Checksum Error" and asks me to insert
> > a system disk. When I boot from the floppy, I can get back into the
> > Award Flash utility (AWFLxxxx) and DOS, but only the A:\ drive is
> > present. The PC manufacturers are sending out an engineer, but that's
> > not for a week. So in the meantime, I was wondering if there was
> > anything to do to rectify the situation. My questions are therefore:
> >
> > 1. What would cause the flash to fail in the first place? As I
> > mentioned above, the whole process seemed to go smoothly. I've flashed
> > other devices before (though never a BIOS), but all throught the
> > process, I was following instructions from technical support.
> >
> > 2. Is there are way I can recover from this, or should I just wait for
> > the engineer? I tried to reflash the BIOS, but it just hangs when it
> > gets to the flashing stage.
> >
> > My apologies for not being very detailed, but I'm currently typing
> > this at work, so I haven't got all the information in front of me. I
> > think the motherboard is the MSI-6729 (Athlon XP 3000 processor).
> >
> > Thanks in advance,
> > Oliver


I don't believe so. I'm definitely not operating RAID or SCSI. I am
unfamiliar with Boot ROMS on network cards. I've got a standard
Ethernet port, an Actiontec USB wireless adaptor and a Firewire port,
but I don't believe any of these would have ROMs.

Oliver
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

"Roger Hamlett" <rogerspamignored@ttelmah.demon.co.uk> wrote in message news:<1sGsc.33$yZ.24@newsfe6-win>...
> "rstlne" <.@text.news.virgin.net> wrote in message
> news:NEGsc.373$_%5.213@newsfe2-gui.server.ntli.net...
> > "olli" <olippold@hotmail.com> wrote in message
> > news:bb65d8d2.0405240016.2e3e5340@posting.google.com...
> > > I bought my new PC about a month ago and just received a floppy with
> > > the latest BIOS on it (Award BIOS v5.3). I therefore phoned up my PC
> > > manufacturer's technical support (they sent me the floppy in the first
> > > place) and went through the whole flash process with them. Everything
> > > seemed to go okay (they were no errors and the process completed) but
> > > the PC will now longer boot. Instead, I it starts the BIOS BootBlock
> > > program, displays the "BIOS ROM Checksum Error" and asks me to insert
> > > a system disk. When I boot from the floppy, I can get back into the
> > > Award Flash utility (AWFLxxxx) and DOS, but only the A:\ drive is
> > > present. The PC manufacturers are sending out an engineer, but that's
> > > not for a week. So in the meantime, I was wondering if there was
> > > anything to do to rectify the situation. My questions are therefore:
> > >
> > > 1. What would cause the flash to fail in the first place? As I
> > > mentioned above, the whole process seemed to go smoothly. I've flashed
> > > other devices before (though never a BIOS), but all throught the
> > > process, I was following instructions from technical support.
> One (unfortunate) possibility, is that some machines take several seconds to
> actually finish writing the BIOS, after the process has apparently
> completed. It is fairly common to get this type of error on these...
> An other possibility is that the flash utility itself had a problem.
> The other very common problem (in the past, relatively rare now), is that
> some cards, can cause problems with the BIOS flash. It is allways best to
> have the machine fairly 'bare' when flashing. For instance, in the past
> there was a similar problem on some Asus boards, when certain Adaptec cards
> were present. What appeared to be happening, was that the flash utility
> attempted to use part of the memory map, that was occupied by this card, for
> temporary storage during the flash, and the data then got corrupted...
> Probably the most likely problem though, is that there is actually a fault
> in the flash chip, which has now shown up. :-(
>
> > > 2. Is there are way I can recover from this, or should I just wait for
> > > the engineer? I tried to reflash the BIOS, but it just hangs when it
> > > gets to the flashing stage.
> Is there a slightly older BIOS, and possibly another copy of the flash
> utility on the web?. If so, try making a disk carrying these.
>
> > > My apologies for not being very detailed, but I'm currently typing
> > > this at work, so I haven't got all the information in front of me. I
> > > think the motherboard is the MSI-6729 (Athlon XP 3000 processor).
> > >
> > > Thanks in advance,
> > > Oliver
> >
> >
> > If you can enter the bios then the first thing to do is reset it (your
> > better off doing this from the motherboard BUT I wouldnt say do it if you
> > have a contract)..
> > Instead when you enter the bios tell it to reset to default
> > after your done with that then detect new drives.
> You are talking about the _CMOS_ setup here, not the 'BIOS'. Though it is
> good advice to allways do a CMOS setup after flashing a new BIOS
> (unfortunately the meaning of some CMOS bits can change from version to
> version), a BIOS checksum error, has nothing to do with the CMOS.
>
> > IF it gives a checksum error every boot then that's not good (but
> resetting
> > it via board might fix)..
> > Basically you can have values (settings) that were written pre-update and
> > they have stayed and now some of those values might not be used (or might
> > even have changed structure)..
> > So if you can enter bios, then reset to default, look for new drives, then
> > reboot and see if it works.
> If the error is a CMOS checksum error, rather than a BIOS checksum, then
> this would apply. However the message being described is long before the
> CMOS handling is even reached. Most BIOS's have a basic 'boot block', which
> contains support only for the floppy device, and to talk to the screen in
> basic EGA mode. This remains unchanged normally when flashing the rest of
> the BIOS. This code is (just) enough to allow the machine to boot a floppy,
> and reprogram the BIOS. This code is executed before the CMOS is accessed,
> with the machine normally running in it's slowest speed, and tests the
> checksum of the main BIOS, and executes this if the checksum is OK. It is
> this that is still running.
>
> Best Wishes

I think the BIOS had definitely finished flashing as I think there was
a message at the end. I was considering trying to get hold of the
previous version of the BIOS (ie my original version) but it may be
quite tricky finding it - the MS-6729 is an OEM board and it took me
ages just to find acknowledgement of its existence on the MSI website.
I did try reflashing with the current version, but it won't flash it
all - it displays the flash progress screen but just hangs.

Oliver