biostar N68SB-M3S Splash screen.

[Kahoshi]

hey there, for the life of me I cannot figure out how to make the splash screen show up for this motherboard, I've used BIOScreen to update however there have been no changes on my startup.

Any help would be great!

 

[JimF_35]

Try this:

When system boot to logo screen, press [Tab] key on the keyboard to by pass the logo, then monitor will show system information.

Or go to CMOS> Boot > Full Screen Logo Display set to disable to turn off the logo screen.

If system boot up too fast, please go to CMOS> Boot> Set Prompt Timout and set the delay time to 5.

System infomation will show 5 seconds on POST screen.

from

http://www.biostar-usa.com/app/en-us/support/faq_content.php?S_ID=610

 

[Kahoshi]

Try this:

When system boot to logo screen, press [Tab] key on the keyboard to by pass the logo, then monitor will show system information.

Or go to CMOS> Boot > Full Screen Logo Display set to disable to turn off the logo screen.

If system boot up too fast, please go to CMOS> Boot> Set Prompt Timout and set the delay time to 5.

System infomation will show 5 seconds on POST screen.

from

http://www.biostar-usa.com/app/en-us/support/faq_content.php?S_ID=610

there isnt any such option, I'm starting to think they left the splash screen out entirely with this model, which would be boring as I've wanted to modify it.

 

[Kahoshi]

I've given in to my fate, cannot find an option for a splash screen so I give up