BitFenix Fury PSUs Have Individually Sleeved Cables

Status
Not open for further replies.
That's so messy. I've been threatening myself to put a bus bar in my next pc, so I could have exact length pristine wire management. I'm talking naked connectors, not that insulated garbage.

It would be pretty enough to run on the motherboard side. Although, I'm not sure where I'd fit a bar long enough to fit all of that.
 
That just sounds stupid. The idea of a sleeved cable is to bundle up the wires so that it improves airflow. What's the point of sleeving the individual wires?
 
I really like this method of sleeving as it allows the cable to lay very flat for cases that don't have a lot of room behind the motherboard tray. I also think it looks better than a bunched up cable with the colored wires sticking out the end.
 
That just sounds stupid. The idea of a sleeved cable is to bundle up the wires so that it improves airflow. What's the point of sleeving the individual wires?

To make it more flexible maybe, though I cant say Ive really had a problem with that before.
 
Yeah, I'm also not getting the reason why these companies are making sleeved individual cables for PSU's or for any strand of cables for that matter.

The whole point of sleeved together cables was that you weren't looking at a rats nest of intermixed wires. Flexibility I get, but if you go out and buy any modern case, it's going to have cable management. Either tucked away on the backside of the case or through cable mounts inside the case.

I would MUCH rather see a FLAT sleeved cable that would have more practical applications.
 
Doing individual cable sleeving is part aesthetics, part comfort.

I individually re-sleeved mine myself with black connectors, black sleeve and red heat shrink thus matching the color scheme of the installed hardware which is black and red as well ( Motherboard, PSU, GPUs, Fans, etc... )

The individually sleeved wires obviously do take up more space but you'll be able to do things like routing the between the Motherboard and Backplate - Something you can't do with a single 24 wire Sleeve because it's way too thick.

For most people it's an aesthetical thing when you can watch into the case, for others it's a necessity because of bad case planning requiring flexibility.
 
Anyone remember when you could get a good PSU around 750W or more for under 100$?

PSU's rape my fragile budget man.... not cool
 
Status
Not open for further replies.